1680x1050 on HP USB 2.0 docking station and Samsung 2343bw
 

Hi,

Iam not able to turn my new HP USB 2.0 docking station to display higher resolution than 1280x1024 on a Samsung Syncmanster 2343BW. I understand that the native resolution (2048x1152) its not supported by the DisplayLink chip, but i would expect, that it could run on 1680x1050 witch is supported by both devices.

DisplayLink Support Files can be found in the attachement.

Thanks in advance for any help.

Here is the list of the modes supported by your monitor:

Display Modes
=============
640x480x24@60
800x600x24@56
800x600x24@60
1024x768x24@60
1280x960x24@60
1280x1024x24@60
2048x1152x24@60

It runs on 1280x1024 as this is the highest resolution supported by both docking station and the monitor.

Regards

Thanks Pawel,

it seems you are right, strange is that in the manual I downloaded from Samsung support page is the list of modes much longer. But when I connected the monitor to other graphics card 1680x1050 was not supported either.

Bad luck.