Dear developers and readers
I have the following setup:
Mac Mini Lion Server as Workstation
Lion 10.7.2 Developer 11C57
2x Samsung 24" Displays over DVI direct connected on the Mac Mini
DisplayLink driver 1.7b3
2x SAMSUNG U70 7" Display over USB (Connected to Belkin 7-Port USB Hub)
Problem:
I did setup the Displays that way, that the two big ones are placed next to each other. The two small ones are placed also next to each other but below the big ones. Now every restart (warm or cold) the position of the two small displays is switched in between the two. That means that after the placement of the displays, from left to right and from top to bottom is this way.
------------------------------------------------------
|----------Display 1 Big | Display 2 Big----------|
------------------------------------------------------
|-Display 3 Small | Display 4 Small-|
-----------------------------------------
Now the placement of Display 3 and Display 4 will be changed so that Display 4 is on the left side below Display 1 and Display 3 is on the right side below Display 2. The real crazy thing is, that the content of the of the displays stays where it is during the placement of the Displays 3 and 4. I have to do this replacement because the direct movement of the cursor is not possible anymore.
Is this a bug of the DisplayLink 1.7b3 software or is it a other problem link som problem of the SAMSUNG U70 Displays?
Thank you all for anyones replay and feedback.
Regards
Thomas Thaler