Empty screen on DL-165, HP8530W, WinXP 32b, NVIDIA Quadro FX 770M
Hi,
I've go problem with using my USB VGA adapter on HP Eliteboot 8530w, with Windows XP 32bit.
This laptop is equipped with NVIDIA Quadro FX 770M adapter, I use latest NVIDIA drivers (260.99).
All I have is just empty screen on the monitor connected to adapter based on DL-165.
I was trying to use several LCD monitors; IBMs and Dells, with digital and analog connections, always with blank screen. Cables are 100% OK.
I also tried different PC with WXP-32b, and *not equipped* with NVIDIA VGA card - it is just working OK.
I am able to configure the adapter, set the resolution, etc. The "only" problem is just blank screen.
I have the same problem with both lines of DL drivers (latest version from 5.4 and 5.5).
Could you please provide some hints, help or suggestions how can I have this working correctly.
Detailed system info below:
Windows XP 32bit (service pack 3, etc).
--------- Computer Info ---------
Computer Name: *****
Logged on as: ****
Computer: Hewlett-Packard - HP EliteBook 8530w
OS: Microsoft Windows XP Professional (X86-based PC), Service Pack 3, English
OS Build: 2600
System Bios Date: 09/15/09
System Bios Version: HPQOEM - f
CPU: Intel(R) Core(TM)2 Duo CPU T9600 @ 2.80GHz
Memory: 3036 MB
Free Space: 6071 MB
Primary Resolution: 1600x1200x32
Graphics: NVIDIA Quadro FX 770M (NVIDIA)
Graphics Driver: 6.14.12.6099 Dated 2010-10-16
Installed Package: DisplayLink Graphics (5.5.27887.0) on 2010-12-02 Status is Installed
Installed Package: DisplayLink Core Software (5.5.27797.0) on 2010-12-02 Status is Installed
Installed Codec: Indeo® video 5.10 Intel Corporation R.5.10.15.2.55
DisplayLink Version: 5.5.27797.0
--------- Nivo Info ---------
Nivo's currently attached: PID_0290\\103976
Nivo's that have been attached: USB_0290-103976
--------- Nivo Config ---------
HWP2675-CZK821065V
Mode = 1280x960x32@60
Rotation = 0
Attached = no
USB_0290-103976
Mode = 1024x768x32@60
Rotation = 0
Attached = yes
|