DisplayLink Forum - View Single Post - USB Graphics Adapters doesn't show up in the Display Properties screen.

Wim · 05-22-2010, 03:54 AM

Hi

I've had a look at the log files, and it appears that the chip in the device is not booting up properly. Its coming up as PID 0x8060 in device manager, which shows its booted from its internal ROM, not the external boot device. This means it will not enable any video outputs.

Could you try unplugging all cables from the adapter, then connect USB, then connect the video cable? If it still comes up as 0x8060, then I suspect the device is faulty I'm afraid.

Thanks

Wim

05-22-2010, 03:54 AM	#4
Wim Senior Member Join Date: Feb 2009 Posts: 1,561	Hi I've had a look at the log files, and it appears that the chip in the device is not booting up properly. Its coming up as PID 0x8060 in device manager, which shows its booted from its internal ROM, not the external boot device. This means it will not enable any video outputs. Could you try unplugging all cables from the adapter, then connect USB, then connect the video cable? If it still comes up as 0x8060, then I suspect the device is faulty I'm afraid. Thanks Wim