|
04-02-2010, 02:34 AM | #1 |
Junior Member
Join Date: Apr 2010
Posts: 3
|
Cannot position displays where I want them
Beta DisplayLink-5.3.23653 introduced a new problem. I will use the display numbers as they currently are, the actual numbers do not matter to as long as I can keep using the same number for each display:
1: 1920 x 1200 laptop display is the primary, it is in a key board tray down lower than the others.When I use the icon in the system tray, that only allows me to position the USB displays to the right and left of my primary. With DisplayLink-5.2.21675, I could get the displays positioned the way I wanted. Although when I disconnected my laptop and then reconnected it the order of the external monitors would change. The two USB ones would be next to each other. I would then use the Windows Display Properties control panel to reposition them. This worked before I went to the beta version. Now with the beta release it does not. I am working around this problem by having the display the left(#3) down slightly so that it overlaps with the laptop display just a little. This makes things usable, although it would be nice to get this fixed. |
|
|