02-05-2013, 12:02 AM | #1 |
Junior Member
Join Date: Jan 2013
Posts: 12
|
Rotation only works up to 1080p instead of 1440x2560
I'm using an iMac 27" mid-2010 with 3 Dell U2713HM monitors in portrait mode.
MONITOR 1: With the built-in mini-DisplayPort the first monitor will rotate to 1440x2560 resolution. This is using built-in video drivers. MONITOR 2: With the StarTech DisplayPort adapter running over USB2, I can get the second monitor to run at 2560x1440. This is using the DisplayLink 2.0a2 driver. But when I try to rotate it 90/180/270 it won't go 1440x2560. When it's 180 degrees, it still doesn't show 2560x1440. It defaults to 1080p, and the scaled resolutions max out at 1200x1600 and 1080p (which I think is 1080x1920). MONITOR 3: Same thing as monitor 2. DisplayLink adapter doesn't want to rotate 2560x1440 resolution to 1440x2560. It drops down to 1080p. Is there a workaround for this? Is there a Display Override that I should be using or does the 2.0a2 driver need to be updated to support rotation above 1200x1920? |
02-05-2013, 08:03 AM | #2 |
Senior Member
Join Date: Feb 2010
Posts: 386
|
Which OS X version is it? Can you please post the logs captured when all your screens are connected? Thanks.
|
02-05-2013, 07:09 PM | #3 |
Junior Member
Join Date: Jan 2013
Posts: 12
|
Here's my diagnostic file. I'm running under OS X 10.8.2. I'm using an iMac 27" with 3 identical Dell U2713HM monitors. The first Dell is rotated at 1440x2560 using on-board video through a mini-DisplayPort to DisplayPort cable. The second and third monitors are rotated at 1080p using USB2 to a DisplayLink adapter to DisplayPort cable.
I've also posted a video for you here of the issue. Hope that helps to see it. http://www.idiotsavant.com/displayli...tion-issue.mp4 |
02-10-2013, 08:54 PM | #4 |
Senior Member
Join Date: Feb 2010
Posts: 386
|
|
|
|