Go Back   DisplayLink Forum > Alpha, Beta Software Testing Programs > Closed Alpha and Beta Programs > CLOSED: 5.3 Software Release

 
 
Thread Tools Search this Thread Display Modes
Old 03-06-2010, 10:54 PM   #1
sundansx
Junior Member
 
Join Date: Jan 2010
Posts: 7
Default Physx not working on second graphics card

I have a second graphics card in the system that is not SLI'd in use as a dedicated physx card. it does not have a display attached and does not have any SLI bridge stuff hooked up. Just in a second PCIE slot. When the Displaylink software is installed, the second card is not used for physx, only the primary card. When the displaylink software is removed, the second card is used properly for physx. In both cases the 240 is selected for physx offload in Nvidia display panel. Heres how to tell on Win 7:
1. get the GPU observer desktop gadget:
http://blog.orbmu2k.de/
2. select the 240 and turn on "show GPU load". You can run two of these, one for each GPU.
3. download the "nvidia physx particle fluid demo" from here (you can turn off the rest of the download from the power packs)
http://www.nvidia.com/content/graphi...s/download.asp
4. Run this demo with and without the displaylink software and watch the load on the second physics GPU (240 in this case).
5. I also saw this behavior on the "Dark void physx benchmark" and the "fluidmark" 1.1.1 benchmark:
http://www.ozone3d.net/benchmarks/physx-fluidmark/

Config:
Windows 7 32 bit Ultimate
Nvidia gtx275 graphics with driver 196.75 (and attached physx version)
Nvidia gtx240 graphics card with driver 196.75
2 22" monitors attached in windows multimonitor mode to the 275
Core2 duo 9650 system with 3.2 gigs (4 actually)
Displaylink software version 5.3 beta 2
MIMO 710

Note: Here is a card that should exhibit the problem since it is a very similar setup to my discrete solution:
http://www.evga.com/products/moreInf...eries%20Family
sundansx is offline  
Old 03-08-2010, 05:45 PM   #2
Wim
Senior Member
 
Join Date: Feb 2009
Posts: 1,561
Default

Hi

This release does not aim to support SLI mode, therefore there could be problems when using DisplayLink software with SLI.

SLI support is targetted for a future release.

Thanks

Wim
Wim is offline  
Old 03-08-2010, 10:51 PM   #3
sundansx
Junior Member
 
Join Date: Jan 2010
Posts: 7
Default

I look forward to a fix in the future, but this is not SLI mode. the SLI bridge is not installed, and the second graphics card is not being used for 3D acceleration (it does not have a monitor attached). It is only used for a physics coprocessor.
Maybe you guys can look at this case when you are invesgating SLI (3d visual acceleration) issues.
thanks.
sundansx is offline  
Old 09-01-2010, 02:16 AM   #4
bugmenot
Junior Member
 
Join Date: Jul 2010
Posts: 18
Default

It also seems that PhysX is disabled completely on my GTX 460 when my USB monitor is plugged in. Unplugging the monitor, enabling PhysX via the Nvidia control panel, then plugging the monitor back in re-enables PhysX processing on the 460, but only until Windows reboots.
bugmenot is offline  
 

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 08:49 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.