Anyone install 10.6.2 yet??

montypython · 11-10-2009, 12:45 PM

Anyone install the new apple update?

Any issues with display link?

I am holding off until i hear it is good to go.

witespy · 11-11-2009, 05:57 AM

Cross your fingers ....

wuffe · 11-11-2009, 08:46 AM

I'm running 10.6.2 with the 1.5beta6 DisplayLink driver.

graphics seem to work fine but I've posted these observations yesterday:

http://displaylink.org/forum/showthread.php?t=122

Uojomo · 11-11-2009, 08:50 AM

My MacBook Pro 2.33ghz (2.2) works fine after installing 10.6.2. Using the BVU195 card, with both ACD-23 and VA712b displays. Tested the cards on both displays.

Mr_E · 11-11-2009, 02:37 PM

one of my machines will no longer resume from sleep ...more or less.
I can remotely access the shares, etc. But he GUI hangs solid until I do a hard reboot. System logs point to the displaylink drivers as the culprit..

danielwsmithee · 11-11-2009, 05:48 PM

Everything seems fine here.

ldog · 11-12-2009, 03:03 PM

Quote:

Originally Posted by Mr_E

one of my machines will no longer resume from sleep ...more or less.
I can remotely access the shares, etc. But he GUI hangs solid until I do a hard reboot. .

Exact same issue. Not every sleep, but three times in a few days.
MacBook2,1 2.16, OSX 10.6.2, Diamond BVU160, Dell 2005fpw, 1.5b6

SpyderZ · 11-16-2009, 10:27 PM

Quote:

Originally Posted by Mr_E

one of my machines will no longer resume from sleep ...more or less.
I can remotely access the shares, etc. But he GUI hangs solid until I do a hard reboot. System logs point to the displaylink drivers as the culprit..

Same here, it's been doing this since Snow Leopard on my Mac Pro.

legege · 11-30-2009, 04:51 PM

Same issue here: screens are frozen on resume.

However, there is a workaround: put the computer to sleep again (Cmd+Opt, Eject), and wake it. It will resume correctly.

11-10-2009, 12:45 PM	#1
montypython Junior Member Join Date: Sep 2009 Posts: 2	Anyone install 10.6.2 yet?? Anyone install the new apple update? Any issues with display link? I am holding off until i hear it is good to go.

11-11-2009, 05:57 AM	#2
witespy Junior Member Join Date: Nov 2009 Posts: 4	Cross your fingers .... Last edited by witespy; 11-11-2009 at 09:18 AM.

11-11-2009, 08:50 AM	#4
Uojomo Junior Member Join Date: Nov 2009 Posts: 1	No problems thus far... My MacBook Pro 2.33ghz (2.2) works fine after installing 10.6.2. Using the BVU195 card, with both ACD-23 and VA712b displays. Tested the cards on both displays.

11-11-2009, 02:37 PM	#5
Mr_E Junior Member Join Date: Aug 2009 Location: NY Posts: 1	10.6.2 introduced a wake from sleep error for me one of my machines will no longer resume from sleep ...more or less. I can remotely access the shares, etc. But he GUI hangs solid until I do a hard reboot. System logs point to the displaylink drivers as the culprit..

11-11-2009, 08:46 AM	#3
wuffe Junior Member Join Date: Aug 2009 Posts: 14	I'm running 10.6.2 with the 1.5beta6 DisplayLink driver. graphics seem to work fine but I've posted these observations yesterday: http://displaylink.org/forum/showthread.php?t=122

11-11-2009, 05:48 PM	#6
danielwsmithee Junior Member Join Date: Nov 2009 Posts: 2	Everything seems fine here.

11-30-2009, 04:51 PM	#9
legege Junior Member Join Date: Oct 2009 Posts: 5	Same issue here: screens are frozen on resume. However, there is a workaround: put the computer to sleep again (Cmd+Opt, Eject), and wake it. It will resume correctly.