07-22-2011, 01:03 AM | #1 |
Junior Member
Join Date: Jul 2011
Posts: 17
|
No Display
I have no display at all out of the UV+ with the 1.7b2 driver on Lion.
Last edited by trotunda; 07-22-2011 at 01:07 AM. Reason: Attach file |
07-22-2011, 01:23 AM | #2 |
Junior Member
Join Date: Jul 2011
Posts: 17
|
More info
I noticed a lot of stuttering with the mouse, etc, until I removed the driver.
|
07-22-2011, 02:02 AM | #3 |
Junior Member
Join Date: Jul 2011
Posts: 17
|
Evan more info
7/21/11 8:59:30.000 PM kernel: 0 0 AppleUSBCDC: start - initDevice failed
I wonder if that might indicate a problem. This is a new out of box about 2 hours ago, so I would find it hard to believe that it has failed. |
07-22-2011, 10:47 AM | #4 | |
Senior Member
Join Date: Apr 2011
Posts: 280
|
Quote:
Looking at your debug information, it seems that the driver is unable to communicate with the USB device. We are still investigating the issue. Could you please plug-in the DisplayLink card, run the USB Prober (Developer/Applications/Utilities), select the Port Status tab, press Save Output and post the resulting file? Thanks |
|
07-23-2011, 05:20 PM | #5 |
Junior Member
Join Date: Jul 2011
Posts: 17
|
Update
See attached zip for log files and read on for more info. I got it working once for about 30 seconds but then it stopped. That was with nothing else plugged into the Mac except power and the UV+. My latest config follows.
My config: MacBook Pro 8MB RAM Mini DisplayPort to Dual-Link DVI Adapter Mac USB Keyboard plugged into Macbook USB port 1 Logitec M705 wireless mouse plugged into keyboard. Airport off 1G Ethernet active UV+19 plugged into Macbook USB port 2 With the above config, a cold restart without the UV+ plugged in. After the system normalizes, I plug the UV+ in and get no display except for a flicker when I mouse over to it and the kernel.log showing the following: Jul 23 12:02:20 tramac kernel[0]: AppleBCM5701Ethernet: 0 1 BCM5701Enet::replaceOrCopyPacket worked after N tries Jul 23 12:02:41 tramac kernel[0]: IOSurface: buffer allocation size is zero Jul 23 12:03:11: --- last message repeated 2 times --- Jul 23 12:03:30 tramac kernel[0]: 0 0 AppleUSBCDC: start - initDevice failed Jul 23 12:03:39 tramac kernel[0]: USBF: 153.410 [0xffffff80144a9400] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 4 of Hub at 0xfa100000) Jul 23 12:03:40 tramac kernel[0]: USBF: 154.152 [0xffffff80144a9400] The IOUSBFamily has successfully enumerated the device. Jul 23 12:03:40 tramac kernel[0]: 0 0 AppleUSBCDC: start - initDevice failed Jul 23 12:04:11: --- last message repeated 2 times --- Jul 23 12:04:11 tramac kernel[0]: IOHIDSystem cursor update overdue. Resending. Jul 23 12:04:12 tramac kernel[0]: 0 0 AppleUSBCDC: start - initDevice failed Jul 23 12:04:15: --- last message repeated 3 times --- Jul 23 12:04:15 tramac kernel[0]: IOHIDSystem cursor update overdue. Resending. Jul 23 12:04:17 tramac kernel[0]: 0 0 AppleUSBCDC: start - initDevice failed Jul 23 12:04:43: --- last message repeated 16 times --- Jul 23 12:04:43 tramac kernel[0]: IOHIDSystem cursor update overdue. Resending. Jul 23 12:04:45: --- last message repeated 1 time --- Jul 23 12:04:45 tramac kernel[0]: 0 0 AppleUSBCDC: start - initDevice failed Jul 23 12:05:15: --- last message repeated 2 times --- Last edited by trotunda; 07-23-2011 at 05:53 PM. Reason: Spaced the file again! |
07-23-2011, 07:37 PM | #6 |
Junior Member
Join Date: Jul 2011
Posts: 17
|
Another update
I got this thing to work.....until I mouse over to it then it goes dark. I set the res at 800x600 and set the freq to 72. The display lights up but then when I mouse over to it things go dark. Attached are the logs.
|
07-26-2011, 06:44 PM | #7 |
Junior Member
Join Date: Jul 2011
Posts: 2
|
|
07-26-2011, 11:38 PM | #8 |
Junior Member
Join Date: Jul 2011
Posts: 17
|
What's the deal
So what's the deal guys? I paid lots of $$ for this thing, it don't work and you all have had two business days to update this post. What's up with that? I would gladly accept this level of service if it was free, but it wasn't.
I would like a fix today, not that I expect one, but at least some sort of reply would be nice. Tim |
07-28-2011, 03:58 PM | #9 |
Junior Member
Join Date: Jul 2011
Posts: 17
|
Beta 3
Can you all answer a simple quick question? When can we expect beta 3?
|
07-29-2011, 12:39 PM | #10 |
Junior Member
Join Date: Jul 2011
Posts: 17
|
Contact
I got an email from support. They said they would take the additional info and get back to me in 3 business days. It's something at least.
|
|
|