Go Back   DisplayLink Forum > DisplayLink Graphics Technology > Windows Software

Reply
 
Thread Tools Search this Thread Display Modes
Old 03-09-2012, 10:37 PM   #11
rlane00
Junior Member
 
Join Date: Feb 2012
Posts: 9
Default

I just sent them an email, with a link back to this thread, and asked them to provide with some feedback on the situation. Thanks.
rlane00 is offline   Reply With Quote
Old 03-19-2012, 03:04 PM   #12
ultrah
Junior Member
 
Join Date: Mar 2012
Posts: 4
Default

I can confirm this issue.

I also own a Samsung Series 7 700Z3A and a Toshiba Dynadock U3.

The dock works fine on the USB 2.0 port, albeit with lower display performance.

On USB 3.0 it is only recognized as two generic usb hubs. I can use mouse and keyboard, but nothing else.

On another Machine with an ASMedia 106x Controller it works fine on USB 3.0

Host Controller Driver Version is Version 1.14.8.0, OS is Win 7 x64


by the way, I only got useless respones from samsung along the lines of "the notebook is fine, the device you are trying to attach is broken"

Last edited by ultrah; 03-19-2012 at 03:41 PM.
ultrah is offline   Reply With Quote
Old 04-02-2012, 06:26 PM   #13
Randog77
Junior Member
 
Join Date: Apr 2012
Posts: 2
Default USB 3.0 works now...

Version ASMedia 1.14.8.0 works properly with the Displaylink now!
Randog77 is offline   Reply With Quote
Old 04-03-2012, 09:23 AM   #14
ultrah
Junior Member
 
Join Date: Mar 2012
Posts: 4
Default

Quote:
Originally Posted by Randog77 View Post
Version ASMedia 1.14.8.0 works properly with the Displaylink now!
I can't verify this because I am on vacation right now but I doubt that. If you look one post up you can see that I already tried this driver version.

Last edited by ultrah; 04-04-2012 at 07:24 PM.
ultrah is offline   Reply With Quote
Old 04-04-2012, 05:01 PM   #15
rlane00
Junior Member
 
Join Date: Feb 2012
Posts: 9
Default

I just updated to this latest driver version and the USB3.0 is now working for me just as promised. I hadn't tried to update previously based on the feedback that it hadn't worked for ultrah, but it's working for me.
rlane00 is offline   Reply With Quote
Old 04-11-2012, 10:55 AM   #16
ultrah
Junior Member
 
Join Date: Mar 2012
Posts: 4
Default

Still not working for me :/
Attached Files
File Type: zip NB-2_20120411_115358.zip (222.7 KB, 3 views)
ultrah is offline   Reply With Quote
Old 04-12-2012, 08:55 AM   #17
Wim
Senior Member
 
Join Date: Feb 2009
Posts: 1,561
Default

Its possible that you have different chip versions of the AS Media Host controller and different firmware programmed into the host controller. This is why the new HC driver may work for some and not for others.

ultrah, it might be worth asking AS Media if they have a way of making sure you have the latest firmware in your host controller, as this might help.

Wim
Wim is offline   Reply With Quote
Old 04-27-2012, 07:42 PM   #18
Randog77
Junior Member
 
Join Date: Apr 2012
Posts: 2
Default

I am using the firmware from this site:
http://www.station-drivers.com/page/asmedia.htm

version 110914

The only problem I have found is that I cant use my USB 2 Serial port adaptor (with an FTDI chip inside) and my Terasic blaster (with an FTDI chip insdie) at the same time. It seems to crash something. Its unfortinate, because otherwise everthing works perfect (as far as I can tell). I run on USB 2.0 for now since I cant debug without both running.
Randog77 is offline   Reply With Quote
Old 06-20-2012, 03:40 PM   #19
matthewt
Junior Member
 
Join Date: Jun 2012
Posts: 1
Default

I updated my drivers from the same place as Randog77 and now it's working over USB3.

I also updated the firmware to 1222oE (minor hassle you need to boot into DOS).

This is on a Samsung 700z5a i7 quadcore. Previously only the usb hub worked on USB3 (USB2 everything worked). Now after installing the new USB3 drivers and a few reboots everything is working fine over USB3.
matthewt is offline   Reply With Quote
Old 09-10-2012, 10:10 AM   #20
mikospy
Junior Member
 
Join Date: Sep 2012
Posts: 1
Default solved This problem by installing latest bios and drivers

Hi guys,
I had same problem with vx6s netbook, solved by flashing bios 1222_0e through real DOS promt and using driver 1.14.10.0 all downloadable from station-drivers.com. Not use 1.16.xx.x driver because it contains new drivers for windows 8 but older 1.14.3.x for windows 7
mikospy is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 07:01 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.