Please support Diplaylink products!buv165 rev b USB2.0 USB External Video Display Ada

hoangtran · 08-16-2016, 12:27 AM

I had bought a buv165 rev b USB2.0 USB External Video Display Adapter. It can run good on 10.10, but current i use it again on 10.11.6 it not work, i try all version driver but still fail. Please check and support for this Diplaylink products!. 10000000000000 Thanks for Diplaylink.

USB Display Adapter:

Product ID: 0x8060
Vendor ID: 0x17e9 (DisplayLink (UK) Ltd.)
Version: 0.17
Speed: Up to 480 Mb/sec
Manufacturer: DisplayLink
Location ID: 0xfd120000 / 3
Current Available (mA): 1000
Extra Operating Current (mA): 0

Carlo · 08-20-2016, 08:12 PM

Hi,

In your case the device has developed a hardware fault. PID 0x8086 is not usually recoverable, I'd advise to contact the manufacturer and check if it's possible to have a replacement.

Best regards,
Carlo

08-16-2016, 12:27 AM	#1
hoangtran Junior Member Join Date: Aug 2016 Posts: 1	Please support Diplaylink products!buv165 rev b USB2.0 USB External Video Display Ada I had bought a buv165 rev b USB2.0 USB External Video Display Adapter. It can run good on 10.10, but current i use it again on 10.11.6 it not work, i try all version driver but still fail. Please check and support for this Diplaylink products!. 10000000000000 Thanks for Diplaylink. USB Display Adapter: Product ID: 0x8060 Vendor ID: 0x17e9 (DisplayLink (UK) Ltd.) Version: 0.17 Speed: Up to 480 Mb/sec Manufacturer: DisplayLink Location ID: 0xfd120000 / 3 Current Available (mA): 1000 Extra Operating Current (mA): 0

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-20-2016, 08:12 PM	#2
Carlo Mac Team Join Date: Feb 2009 Posts: 606	Hi, In your case the device has developed a hardware fault. PID 0x8086 is not usually recoverable, I'd advise to contact the manufacturer and check if it's possible to have a replacement. Best regards, Carlo