DL-125 change screen.

delorean · 05-07-2017, 11:24 AM

hi,
I have DL-125 board from MIMO USB monitor. Originally its working with SAMSUNG LTN101NT02 LCD screen. It's possible to change the screen to bigger with higher resolution eg. SAMSUNG LTN125AT01? I tried to connect this display, and all i get is fast blinking of backlight (1-2Hz) and no display image at all.Of course with original display it's working great. Any advices?

AlbanRampon · 05-08-2017, 07:43 AM

Hello,

Changing only the panel won't change what the computer thinks it's talking to.
Also, the panel doesn't change the resolution/timing both requested from the computer and used to drive the panel, the software MIMO got programmed on the board does.
Depending on the requirements of the panel, it may also require a hardware change.

Unfortunately, I do not see a way for you to reprogram the board.

Kind regards,
Alban

05-08-2017, 07:43 AM	#2
AlbanRampon Senior Member Join Date: Sep 2015 Location: Cambridge, UK Posts: 1,678	Hello, Changing only the panel won't change what the computer thinks it's talking to. Also, the panel doesn't change the resolution/timing both requested from the computer and used to drive the panel, the software MIMO got programmed on the board does. Depending on the requirements of the panel, it may also require a hardware change. Unfortunately, I do not see a way for you to reprogram the board. Kind regards, Alban __________________ Alban Rampon Senior product manager, universal docking stations and accessories "DisplayLink is proud to be a Synaptics brand." Where to download the latest DisplayLink drivers How to clean up a corrupted installation How to report issues to DisplayLink for a speedy resolution