Problem with USB 3.0 ASMedia Host controller and DisplayLink

ultrah · 04-11-2012, 09:55 AM

Still not working for me :/

Wim · 04-12-2012, 07:55 AM

Its possible that you have different chip versions of the AS Media Host controller and different firmware programmed into the host controller. This is why the new HC driver may work for some and not for others.

ultrah, it might be worth asking AS Media if they have a way of making sure you have the latest firmware in your host controller, as this might help.

Wim

Randog77 · 04-27-2012, 06:42 PM

I am using the firmware from this site:
http://www.station-drivers.com/page/asmedia.htm

version 110914

The only problem I have found is that I cant use my USB 2 Serial port adaptor (with an FTDI chip inside) and my Terasic blaster (with an FTDI chip insdie) at the same time. It seems to crash something. Its unfortinate, because otherwise everthing works perfect (as far as I can tell). I run on USB 2.0 for now since I cant debug without both running.

matthewt · 06-20-2012, 02:40 PM

I updated my drivers from the same place as Randog77 and now it's working over USB3.

I also updated the firmware to 1222oE (minor hassle you need to boot into DOS).

This is on a Samsung 700z5a i7 quadcore. Previously only the usb hub worked on USB3 (USB2 everything worked). Now after installing the new USB3 drivers and a few reboots everything is working fine over USB3.

Apache1983 · 11-02-2012, 10:42 PM

Quote:

Originally Posted by matthewt

I updated my drivers from the same place as Randog77 and now it's working over USB3.

I also updated the firmware to 1222oE (minor hassle you need to boot into DOS).

This is on a Samsung 700z5a i7 quadcore. Previously only the usb hub worked on USB3 (USB2 everything worked). Now after installing the new USB3 drivers and a few reboots everything is working fine over USB3.

I updated to the latest driver but I don't how to flash the firmware, is it possible if you can post a instruction on how to flash the firmware? Thanks a lot.

Apache1983 · 11-04-2012, 05:11 AM

I have another problem on the Toshiba Dynadock 3.0, the screen becomes fuzzy when I go to the Youtube page and it keeps going on when I play video on full screen, but it disappears when I switch to another web page. I tried both usb 2.0 and 3.0 but same thing happens.

Wim · 11-05-2012, 12:16 PM

Quote:

Originally Posted by Apache1983

I have another problem on the Toshiba Dynadock 3.0, the screen becomes fuzzy when I go to the Youtube page and it keeps going on when I play video on full screen, but it disappears when I switch to another web page. I tried both usb 2.0 and 3.0 but same thing happens.

This could be a side effect of USB issues. If the bandwidth reduces, then the compression will increase to match the lower bandwidth.

Wim

11-04-2012, 05:11 AM	#6
Apache1983 Junior Member Join Date: Nov 2012 Posts: 3	Fuzzy screen when on Youtube I have another problem on the Toshiba Dynadock 3.0, the screen becomes fuzzy when I go to the Youtube page and it keeps going on when I play video on full screen, but it disappears when I switch to another web page. I tried both usb 2.0 and 3.0 but same thing happens.

04-12-2012, 07:55 AM	#2
Wim Senior Member Join Date: Feb 2009 Posts: 1,561	Its possible that you have different chip versions of the AS Media Host controller and different firmware programmed into the host controller. This is why the new HC driver may work for some and not for others. ultrah, it might be worth asking AS Media if they have a way of making sure you have the latest firmware in your host controller, as this might help. Wim

04-27-2012, 06:42 PM	#3
Randog77 Junior Member Join Date: Apr 2012 Posts: 2	I am using the firmware from this site: http://www.station-drivers.com/page/asmedia.htm version 110914 The only problem I have found is that I cant use my USB 2 Serial port adaptor (with an FTDI chip inside) and my Terasic blaster (with an FTDI chip insdie) at the same time. It seems to crash something. Its unfortinate, because otherwise everthing works perfect (as far as I can tell). I run on USB 2.0 for now since I cant debug without both running.

06-20-2012, 02:40 PM	#4
matthewt Junior Member Join Date: Jun 2012 Posts: 1	I updated my drivers from the same place as Randog77 and now it's working over USB3. I also updated the firmware to 1222oE (minor hassle you need to boot into DOS). This is on a Samsung 700z5a i7 quadcore. Previously only the usb hub worked on USB3 (USB2 everything worked). Now after installing the new USB3 drivers and a few reboots everything is working fine over USB3.