Blue screen (Crash dump) on Windows 7

[mrjuls]

Hello,

When I plug my USB displaylink device (Lenovo MO1061) before starting my computer, I don't have any problem, but when I connect it after Windows has been started, I've got the blue screen attached, followed by a reboot.

After the reboot, Windows shows following message:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033

Additional information about the problem:
BCCode: 131
BCP1: 00000002
BCP2: 000000CC
BCP3: 00000000
BCP4: 00000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem (the two files are attached in the zip file crashdump.zip):
C:\Windows\Minidump\082612-40887-01.dmp
C:\Users\xd00001.CLINDOM\AppData\Local\Temp\WER-460670-0.sysdata.xml

Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

I'm using DisplayLink 6.3 with Windows 7 Pro 32 bits on a HP ProBook 6550b. Would you know how to fix this problem?

Thanks and regards

[Wim]

Can you post the log files so we can get the dmp files and load the symbols?

http://kb.displaylink.com/269

Wim

[mrjuls]

Hi, the DisplayLink Support Tool informs me that the graphics driver of my ATI Mobility Radeon 540v is dated 2010/04/21, but I've downloaded the latest version for my computer from the HP support website, and there is no driver for Windows 7 on the AMD/ATI website for the 'Moblity Radeon 500v Series'.

Below is the complete log of the System Compatibility Check:

Pass: WEI is above recommended 3
Pass: No Other USB graphics software installed
Pass: Basic mode support
Pass: Device attached
Pass: Device started correctly
Warning: Graphics driver date

I've also attached the zip file created with the 'Gather Support Information' button.

Thanks for your help,
Julien

[jmg]

Bluescreen wenn plugging or unplugging the third monitor (1 with displaylink) or plugging or unplugging the displaylink device or changing resolution when three monitors are used

OS: Windows7
Graphics: Mobility Radeon HD (4330)
Samsung R522 with LCD 1280x768
LCD-TV over HDMI 1280x768
Monitor plugged to displaylink: 1280x768 and same problem with a 1200x1600 or 1600x1200

The support-tool also tells me that my graphics-adapter-driver is too old although i am using the newest driver available an notes no oher compatibility-issues

I got the same problem with 3 different monitprs plugged to the displaylink-adapter and with the displaylink-driver provided with the card and also with the driver from windos-update and also with the newest driver from the displaylink-website

Only solution i found: restarting the computer as often as needed, sometimes with and sometimes without all monitors plugged in, takes 7 to 40 tries (15 minutes to two hours) every day to get the computer working, which is really annoying becuse it is my Office-Computer.

quik help required

[JamesH]

Hi,

I'd recommend you update to the latest graphics driver from the AMD site.

Thanks,
James

[jmg]

I forgot to mention: I tried this first of all without eny effect.

The computer worked and works perfectly without any graphic-problems and bluescreens untill I use DisplayLink

[jmg]

Because the support did not find any solution and i need to work with three displays the only solution was to sell this computer and the buggy DisplayLink interface and buy another computer with a nvidia-gtx.

This works really fine and I will never use DisplyLink again.