woqref
09-14-2018, 03:00 AM
I have an Asus mb168b+; I can't adjust the brightness or color on it. I have tried the hardware buttons on the monitor, and Windows display personalization settings, and Asus Display Widget. The Asus Widget says, "Selected Monitor Not Supported" even though I have selected the MB168b+. I can rotate the display orientation with the widget, but not change brightness/color profile.
I have installed:
2 displays: a TV through HDMI, and the MB168b+ through USB
Windows 10 Pro v. 10.0.17134
DisplayLink Manager v. 8.2.1952.0
Asus Display Widget 3.1.0.014
Intel HD 630 v. 23.20.16.4973
DisplayLink USB device v. 8.6.1165.0
(I installed the recommended software/drivers from the Asus mb168b+ site)
When I open Device Manger, I see both "MB168B+" and a separate "DisplayLink USB Graphics Device"
the generic PnP Monitor driver is: 10.0.17134.1 from 6/21/2006. It shows in the events tab: Device DISPLAY\ACI2183\7&a29d70d&0&UID256 was not migrated due to partial or ambiguous match.
the DisplayLink USB Graphics Device driver number is: 8.6.1165.0 from 8/24/2018. It also has an error in the events tab: Device USB\VID_17E9&PID_FF03&MI_00\6&1b596286&0&0000 was not migrated due to partial or ambiguous match.
When I open Advanced Display Settings, monitor 1 (a TV) says it is connected to Intel HD 630 graphics. It says Monitor 2 (MB168b+) is connected to MB168b+
I have installed:
2 displays: a TV through HDMI, and the MB168b+ through USB
Windows 10 Pro v. 10.0.17134
DisplayLink Manager v. 8.2.1952.0
Asus Display Widget 3.1.0.014
Intel HD 630 v. 23.20.16.4973
DisplayLink USB device v. 8.6.1165.0
(I installed the recommended software/drivers from the Asus mb168b+ site)
When I open Device Manger, I see both "MB168B+" and a separate "DisplayLink USB Graphics Device"
the generic PnP Monitor driver is: 10.0.17134.1 from 6/21/2006. It shows in the events tab: Device DISPLAY\ACI2183\7&a29d70d&0&UID256 was not migrated due to partial or ambiguous match.
the DisplayLink USB Graphics Device driver number is: 8.6.1165.0 from 8/24/2018. It also has an error in the events tab: Device USB\VID_17E9&PID_FF03&MI_00\6&1b596286&0&0000 was not migrated due to partial or ambiguous match.
When I open Advanced Display Settings, monitor 1 (a TV) says it is connected to Intel HD 630 graphics. It says Monitor 2 (MB168b+) is connected to MB168b+