DisplayLink Forum - Display Link not working after updating to MacOS 13.2.1

DisplayLink Forum (https://www.displaylink.org/forum/index.php)

- Mac Software (https://www.displaylink.org/forum/forumdisplay.php?f=30)

- - Display Link not working after updating to MacOS 13.2.1 (https://www.displaylink.org/forum/showthread.php?t=68646)

I had the same problem, did anyone manage to solve it?

Solve by plugging in second USB connection

AOC monitor using display link stopped working after Mac software upgrade. I was able to solve the issue by plugging in the dual USB connection to the Anker dock I am using. My AOC cord has two USB connectors on one end in case the source does not put out enough of a signal. I'm now wondering if the Mac upgrade changed a power setting that now puts out less of a signal to the AOC monitor. Perhaps that is where the software solution lies.

I updated to 13.2.1 on my Macbook Air M2 this morning and have also experienced this issue since then. I have sent an email to tech support with the required details.

I ran the command mentioned in earlier posts but it made no difference for me.

Hi everyone.

Same here: MBP M2 with Ventura 13.2.1, and with a Dell UD22 USB-C hub.
If I connect two external monitors they are mirrored and the DisplayLink utility displays "no DisplayLink-enabled display detected".

I already tried the permissions reset command, but unfortunately no luck so far.

Any ideas on how to solve this?

please, if any dell ud22 user manages to solve it, let us know here!!!

I am having similar issues. The problem goes away once I leave my laptop open. It does seem to be a power issue.

Quote:

Originally Posted by vpwang (Post 95003)

Meet the same problem right after upgrading to macOS 13.2.1 from 13.2 too.
The DisplayLink manager cannot detect my external monitor at all.

Device: MacBook Air M1
OS: macOS 13.2.1
DisplayLink manager version: 1.8.0
DisplayLink Device:
Dell D6000S (PID: 0x6006)
OWC USB-C Dual HDMI 4K Display Adapter with DisplayLink (PID: 0x6000)

Quote:

Originally Posted by KatarzynaKowalczyk (Post 95016)

Please make sure to check the following article. The USB bus does not show the DisplayLink detected.

Please follow the steps here to gather logfiles and send the logs and more details of what monitors are working and not working to technical-enquiries@synaptics.com.

Please keep in mind that HP USB-C Dock G5 is not a DisplayLink powered device, it will not be able to communicate with our drivers. We are not able to provide support for this product, please contact HP support directly for further support of this product.

Hi vpwang, did KatarzynaKowalczyk solution worked for you? did anyone got this solved? or is this no longer an issue?

I'm postponing my upgrade of macOS to Ventura just because of this issue reported in this thread.

This is my current setup, works fine:

Device: MacBook Pro M1 2020
OS: macOS 12.6.3
DisplayLink manager version: 1.6.1
DisplayLink Device:
Dell D6000S
2 X LG UltraFine Ergo 27UN880-B connected by DisplayPort

Any news regarding this topic?

I just bought wavlink 13 in 1.
I have 13.2.1 in m2 pro, in my case it seams to be connected properly and display it as well, but just blinking all the time. 60hz 2560 x 1440 Not sure if this fault of OS version or my wavlink. Should I return it or keep it and wait for some updates... ?

I have the same problem, the DisplayLink manager cannot detect my external monitor at all.
macOS: Ventura 13.2.1
DisplayLink 1.8.1
Dell Universal Dock (UD22)