DisplayLink Forum
Page 3 of 3 12 3
Show 40 post(s) from this thread on one page

DisplayLink Forum (https://www.displaylink.org/forum/index.php)
-   Mac Software (https://www.displaylink.org/forum/forumdisplay.php?f=30)
-   -   OS X 10.8.2 update - all working ok so far (https://www.displaylink.org/forum/showthread.php?t=1985)

andynormancx 10-04-2012 08:34 AM
Quote:
Originally Posted by GodwinC (Post 7965)
I think the key is if using Displaylink.. don't ever let the machine goes to screen saver / power save..
When my DisplayLink driver is causing problems there is no screen saver or power save involved. It can sometimes be in its broken state immediately after booting for the first time after installing it.

GodwinC 10-04-2012 05:15 PM
In that case, make sure DMProxy is loading correctly when you plug it in.. it should say something like, I also find some microUSB cables are junk:

Code:
2012-10-04 10:06:20.214 AM WindowServer[80]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
2012-10-04 10:06:20.270 AM WindowServer[80]: Display 0x04273740: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferTable (256, 3)
2012-10-04 10:06:20.271 AM WindowServer[80]: Display 0x2b34488d: MappedDisplay Unit 1; ColorProfile { 3, "DELL U2212HM"}; TransferFormula (1.000000, 1.000000, 1.000000)
2012-10-04 10:06:20.272 AM WindowServer[80]: Display 0x04273740: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferTable (256, 3)
2012-10-04 10:06:20.272 AM WindowServer[80]: Display 0x2b38400f: MappedDisplay Unit 3; ColorProfile { 4, "DELL 2005FPW"}; TransferFormula (1.000000, 1.000000, 1.000000)
2012-10-04 10:06:20.273 AM WindowServer[80]: Display 0x2b34488d: MappedDisplay Unit 1; ColorProfile { 3, "DELL U2212HM"}; TransferFormula (1.000000, 1.000000, 1.000000)
2012-10-04 10:06:20.274 AM WindowServer[80]: Display 0x2b38400f: MappedDisplay Unit 3; ColorProfile { 4, "DELL 2005FPW"}; TransferFormula (1.000000, 1.000000, 1.000000)
2012-10-04 10:06:20.275 AM WindowServer[80]: Display 0x04273740: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferTable (256, 3)
2012-10-04 10:06:20.276 AM WindowServer[80]: Display 0x2b34488d: MappedDisplay Unit 1; ColorProfile { 3, "DELL U2212HM"}; TransferFormula (1.000000, 1.000000, 1.000000)
2012-10-04 10:06:20.276 AM WindowServer[80]: Display 0x2b38400f: MappedDisplay Unit 3; ColorProfile { 4, "DELL 2005FPW"}; TransferFormula (1.000000, 1.000000, 1.000000)
2012-10-04 10:06:20.334 AM WindowServer[80]: Display 0x04273740: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferTable (256, 3)
2012-10-04 10:06:20.334 AM WindowServer[80]: Display 0x04273740: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferTable (256, 3)
2012-10-04 10:06:20.335 AM WindowServer[80]: Display 0x04273740: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferTable (256, 3)
2012-10-04 10:06:20.335 AM WindowServer[80]: Display 0x2b34488d: MappedDisplay Unit 1; ColorProfile { 3, "DELL U2212HM"}; TransferFormula (1.000000, 1.000000, 1.000000)
2012-10-04 10:06:20.336 AM WindowServer[80]: Display 0x2b34488d: MappedDisplay Unit 1; ColorProfile { 3, "DELL U2212HM"}; TransferFormula (1.000000, 1.000000, 1.000000)
2012-10-04 10:06:20.336 AM WindowServer[80]: Display 0x2b34488d: MappedDisplay Unit 1; ColorProfile { 3, "DELL U2212HM"}; TransferFormula (1.000000, 1.000000, 1.000000)
2012-10-04 10:06:20.337 AM WindowServer[80]: Display 0x2b38400f: MappedDisplay Unit 3; ColorProfile { 4, "DELL 2005FPW"}; TransferFormula (1.000000, 1.000000, 1.000000)
2012-10-04 10:06:20.337 AM WindowServer[80]: Display 0x2b38400f: MappedDisplay Unit 3; ColorProfile { 4, "DELL 2005FPW"}; TransferFormula (1.000000, 1.000000, 1.000000)
2012-10-04 10:06:20.338 AM WindowServer[80]: Display 0x2b38400f: MappedDisplay Unit 3; ColorProfile { 4, "DELL 2005FPW"}; TransferFormula (1.000000, 1.000000, 1.000000)
Quote:
Originally Posted by andynormancx (Post 7966)
When my DisplayLink driver is causing problems there is no screen saver or power save involved. It can sometimes be in its broken state immediately after booting for the first time after installing it.

cmwade77 10-05-2012 03:38 PM
Quote:
Originally Posted by GodwinC (Post 7965)
I think the key is if using Displaylink.. don't ever let the machine goes to screen saver / power save..
Mine had gone to power save just fine all the time using the work around I posted earlier, but did not always work on boot, which is why we have gone over to the J5 Create devices with Mountain Lion systems for now, we have two other systems that we want to upgrade, but are trying to wait for the DisplayLink drivers.

3 Months will not work for our time frame that we want to upgrade within, ideally we would like to have this done by the end of next week, which means we need time to test the drivers on one system today or Monday, at the latest.


All times are GMT. The time now is 05:23 AM.
Page 3 of 3 12 3
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2026, vBulletin Solutions, Inc.