DisplayLink Forum - USB 3.0 Displaylink DL-3000 series: DL-3100 / DL-3500 / DL-3900

DisplayLink Forum (https://www.displaylink.org/forum/index.php)

- Linux and Open Source (https://www.displaylink.org/forum/forumdisplay.php?f=29)

- - USB 3.0 Displaylink DL-3000 series: DL-3100 / DL-3500 / DL-3900 (https://www.displaylink.org/forum/showthread.php?t=1748)

Mint Version 14?

I've tried every Google article I could find to make this work. Nothing has so far.

When I plug my displaylink into the computer dmesg shows the following output.

[ 5421.703550] usb 1-5: USB disconnect, device number 6
[ 5426.636018] usb 1-5: new high-speed USB device number 7 using ehci_hcd
[ 5426.769197] usb 1-5: New USB device found, idVendor=17e9, idProduct=4301
[ 5426.769201] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5426.769204] usb 1-5: Product: StarTech USB32DPPRO
[ 5426.769207] usb 1-5: Manufacturer: DisplayLink
[ 5426.769209] usb 1-5: SerialNumber: YUAN412130131091460369
[ 5426.770572] parse_audio_format_rates_v2(): unable to retrieve number of sample rates (clock 10)
[ 5426.770832] cannot get ctl value: req = 0x83, wValue = 0x201, wIndex = 0x0, type = 4

Is there going to be a linux driver or support soon? I bought this expecting that it would work on Linux.

Same here on a K33970 I thought I was really close after the dmesg below but I'm giving up all hope now and return the device.

Code:

   59.132364] usb 4-3: new SuperSpeed USB device number 2 using xhci_hcd

[   59.146428] usb 4-3: New USB device found, idVendor=2109, idProduct=0811

[   59.146438] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[   59.146444] usb 4-3: Product: DU3200 3.0 Dock

[   59.146448] usb 4-3: Manufacturer: Goodway

[   59.147246] hub 4-3:1.0: USB hub found

[   59.147553] hub 4-3:1.0: 4 ports detected

[   59.421486] usb 4-3.1: new SuperSpeed USB device number 3 using xhci_hcd

[   59.432958] usb 4-3.1: New USB device found, idVendor=17e9, idProduct=430f

[   59.432968] usb 4-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3

[   59.432974] usb 4-3.1: Product: Kensington USB3.0 Video Dock

[   59.432979] usb 4-3.1: Manufacturer: DisplayLink

Delock USB3.0 Port replicator

Hello, any progress with support of this device?
I'm using network and usb hub. I would like to use sound. Is sound transmit also encrypted? Or is there some way to get it working?

PHP Code:


		
			
[ 2575.572314] usb 8-1.1: new high-speed USB device number 3 using ehci-pci

[ 2575.665916] usb 8-1.1: New USB device found, idVendor=17e9, idProduct=4307

[ 2575.665933] usb 8-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3

[ 2575.665940] usb 8-1.1: Product: USB 3.0 Dual Video Dock

[ 2575.665951] usb 8-1.1: Manufacturer: DisplayLink

[ 2575.665958] usb 8-1.1: SerialNumber: 000400110001784

[ 2575.744306] usb 8-1.4: new high-speed USB device number 4 using ehci-pci

[ 2575.807290] parse_audio_format_rates_v2(): unable to retrieve number of sample rates (clock 10)

[ 2575.807902] parse_audio_format_rates_v2(): unable to retrieve number of sample rates (clock 10)

[ 2575.809656] usb_audio: Warning! Unlikely big volume range (=511), cval->res is probably wrong.

[ 2575.809671] usb_audio: [14] FU [Digital In Playback Volume] ch = 6, val = -8176/0/16usb_audio: Warning! Unlikely big volume range (=511), cval->res is probably wrong.

[ 2575.811287] usb_audio: [11] FU [DisplayLink Audio Capture Volume] ch = 2, val = -8176/0/16<6>[ 2575.814885] usbcore: registered new interface driver snd-usb-audio

[ 2575.842417] usb 8-1.4: New USB device found, idVendor=1a40, idProduct=0101

[ 2575.842435] usb 8-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0

[ 2575.842443] usb 8-1.4: Product: USB 2.0 Hub

[ 2575.843350] hub 8-1.4:1.0: USB hub found

[ 2575.843771] hub 8-1.4:1.0: 4 ports detected

[ 2575.859364] cdc_ether 8-1.1:1.5 eth1: register 'cdc_ether' at usb-0000:00:1d.7-1.1, CDC Ethernet Device, 00:50:b6:55:88:8b

[ 2575.860887] usbcore: registered new interface driver cdc_ether

[ 2576.116187] usb 8-1.4.3: new high-speed USB device number 5 using ehci-pci

Please port these Targus USB3 driver to linux ...

I've also a Targus USB3 I bought with a Dell XPS13.

What's working under Ubuntu :D :
- soud output
- network card
- usb port

What's not test :confused: :
- sound input

What's don't work :mad: :
- display(s) output(s)

Lenovo ThinkPad USB 3.0 Dock

Without usable DVI Lenovo ThinkPad USB 3.0 Dock under Linux the device is functional kaput.:mad:

Is there any update on this? Will you ever bother helping producing a solution for linux?

Would DisplayLink actually like to NOT sell product to oppose draconian drm rules? Hdcp is entirely broken and useless to bother enforcing it with software, so just do so to minimal spec to pass "certification" like everyone does. It will be broken regardless, so for crying out loud help produce a driver for this device already. Hell, the community that wants to see them actually work for their linux systems would likely do it for you with some understanding of the hardware and mired chipset security.

To what extent would one of your professional driver development firms listed charge for such an effort to adapt libdlo for this chip for gods sake? Kickstarter it - you'd get funded by all the people that read off of your homepage that you offer linux support, but really do not, and are now thus screwed like myself and all these folks.

Otherwise you can just be cursed and spit upon as a vendor by said folk, simply because someone within your organization can't figure out a technical solution to a business problem. Your chipset sales profits far outweigh what it would cost to offer a software solution as a driver for linux, and you don't even realize what kind of a market it would open as a raw crtc device for other gpu's alone.

Please?

By the way, remove off your faq that you support linux please. You do not.

Quote:

Originally Posted by mikus (Post 69793)

By the way, remove off your faq that you support linux please. You do not.

THIS. Or at least clarify that it is only supported on older usb 2.0 devices and that you are not working on a solution for usb 3.0.

Maybe it's time to drop someone at the linux foundation a line about false advertising?

I'd still love to see it happen as it would broaden my choice of next laptop to a lot more ultrabooks but given the pace of this thread i'm not holding my breath and will properbly stick to a laptop with native docking support.

Quote:

Originally Posted by Dan (Post 9125)

If you check the other forums here, you'll see we've just released Alpha Mac drivers for DL-3xxx.

I guess, community needs to keep bumping this thread until you release something open sourced alpha-like for linux :rolleyes:
Hope this will give you an idea that linux support is very much desired ;)

I am very very dissapointed that Displaylink does not support USB 3.0 under linux!

I will not be buying any products, and am advising all linux clients not to either. Thankfully I figured this out before I ordered my new laptop, because this means I won't be purchasing an X1 carbon (I was counting on usb 3.0 working).

Seems displaylink has a monopoly on the market, and just wants to secure their pockets. Very bad and I won't be buying any displaylink product until the protocol is opened up so that systems other than Windows can utilize the hardware. This includes any USB 2.0 products, or any other Pluggable/Displaylink related products.