DisplayLink Forum - DisplayLink Does not Detect Displays (IOmega)

DisplayLink Forum (https://www.displaylink.org/forum/index.php)

- CLOSED: Mac 1.6 Release (https://www.displaylink.org/forum/forumdisplay.php?f=11)

- - DisplayLink Does not Detect Displays (IOmega) (https://www.displaylink.org/forum/showthread.php?t=492)

CodeMonkey

10-06-2010 05:18 PM

DisplayLink Does not Detect Displays (IOmega)

1 Attachment(s)

I used my display link when I first bought it, a few months ago, but then stopped using it. (I had to use my extra monitor for other things)

I'm trying to use it now, and it does not seem to work. I've upgraded to the new driver, but, my monitor does not come on.

I'm attaching the output from the debug tool -- please help me!

CodeMonkey

10-06-2010 07:08 PM

Any ideas? I've repaired permissions and re-installed the driver, but nothing :(

CodeMonkey

10-06-2010 07:14 PM

Quote:

Originally Posted by CodeMonkey (Post 1982)

OH -- I do get this in dmesg:

USBF: 7306.487 IOUSBCompositeDriver[0x110be300](IOGEAR External DVI) SetConfiguration (1) returned 0xe00002ed
USBF: 7410.318 [0xc183a00] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 1 of Hub at 0x24000000)
USBF: 7411. 54 [0xc183a00] The IOUSBFamily has successfully enumerated the device.
USBF: 7411. 69 IOUSBCompositeDriver[0xec42000](IOGEAR External DVI) SetConfiguration (1) returned 0xe00002ed

CodeMonkey

10-06-2010 07:53 PM

Quote:

Originally Posted by CodeMonkey (Post 1984)

Nevermind -- I figured it out. The monitor is too large (and it's wide screen) for DisplayLink. That must be why I originally stopped using it. Back to ScreenRecycler.

-Dave

CodeMonkey

10-14-2010 04:45 PM

1 Attachment(s)

So, I bought the Kinsington Universal Multi-Display adapter, and tried it -- still no monitor detected.

It's supposed to support up to 2048x1152, so, my 1900x1200 should work fine, but it doesn't -- any ideas?

I get this when I plug it in:

Code:

USBF:        405.443        [0xc288e00] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 2 of Hub at 0x26000000)

USBF:        406.184        [0xc288e00] The IOUSBFamily has successfully enumerated the device.

Ideas?

CodeMonkey

10-14-2010 10:37 PM

Could this be an incompatibility with my particular monitor? I'm using an Acer B243W.

CodeMonkey

10-14-2010 10:42 PM

I think I found it. When I connect the device, I see this in system.log:

Code:

Oct 14 16:41:15 daves-mbp detectpen[356]: PenDeviceAdded

Oct 14 16:41:15 daves-mbp detectpen[356]: deviceFound, iterating

Oct 14 16:41:15 daves-mbp [0x0-0x1b01b].com.livescribe.PenAutoLaunch[0]: 2010-10-14 16:41:15.040 detectpen[356:903] PenDeviceAdded

Oct 14 16:41:15 daves-mbp [0x0-0x1b01b].com.livescribe.PenAutoLaunch[0]: 2010-10-14 16:41:15.040 detectpen[356:903] deviceFound, iterating

Oct 14 16:41:15 daves-mbp pcscd[5280]: Non-smartcard device launched pcscd [Vendor: 0X17E9, Product: 0X36]

I think that my livescribe drivers are incorrectly grabbing your device!

Any suggestions?

CodeMonkey

10-15-2010 03:37 PM

So, after disabling that device, it seems more likely that the USB devices are enumerated, and, for some reason, display link never grabs the device.

I could really use some assistance. I now have two non-working display links.

moha	10-16-2010 01:51 AM

I noticed the same thing with mine: http://www.displaylink.org/forum/showthread.php?t=365 I don't get how to repair enumerated usb cables.

CodeMonkey

10-18-2010 03:18 PM

Quote:

Originally Posted by moha (Post 2021)

I noticed the same thing with mine: http://www.displaylink.org/forum/showthread.php?t=365 I don't get how to repair enumerated usb cables.

I'm not sure how that thread has anything to do with my issue. I don't have ghosting displays -- my displaylink adapter(s) will not detect my display (Acer B243W)

moha	10-19-2010 01:05 AM

Quote:

Originally Posted by CodeMonkey (Post 2026)

I'm not sure how that thread has anything to do with my issue. I don't have ghosting displays -- my displaylink adapter(s) will not detect my display (Acer B243W)

I used quick reply; this time, I'll quote.

Quote:

Originally Posted by CodeMonkey (Post 2010)

Code:

USBF:        405.443        [0xc288e00] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 2 of Hub at 0x26000000)

USBF:        406.184        [0xc288e00] The IOUSBFamily has successfully enumerated the device.

Ideas?

I have this same issue along with the ghosting. It'll display that same message in console when I plug in the device. In no way am I trying to hijack your thread (or implying thats what you think), i'm not sure if there is a correlation yet. Since tech help is trying to support us now, I thought it would be wise to relay that I have a issue such as yours (along with all the other crap I'm dealing with with this device).

CodeMonkey

10-19-2010 04:06 PM

Ahhh -- I understand now -- yes, every bit helps . . . I hope someone from Display Link responds soon.

CodeMonkey

01-05-2011 05:13 PM

Any updates? Could someone please look at my diagnostics file?

All times are GMT. The time now is 06:34 AM.