![]() |
Flickering/Freezing display
1 Attachment(s)
Hi! I have problems with my monitors connected to a HP 3005pr port replicator. The displays keeps flickering and sometimes freezes. I currently have Windows 10 installed but I had the same problem in Windows 8.1. Actually the problems got worse when I installed a later version of the displaylink software in Windows 8.1. In Windows 10 it doesn't matter if I use an old version or a new one. Currently I am using the latest version distributed from HP.
I have tried different monitors, different cables and connecting one monitor at the time to both display port and hdmi with the same flickering/freezing result. I have attached a zip file with debug information. Can please someone assist with trying to find what is the problem with the setup. Edit: The displays freezes/flickers when I have both a HDMI and Displayport monitor connected and just flickers when only one of them is connected. Thank you! |
Hi,
Sorry for the delay in replying. To help diagnose this could you: 1. Post a video showing the issue 2. Post the serial number of the dock Thanks, James |
Hi!
Attached is the video showing the problem. https://onedrive.live.com/redir?resi...nt=video%2cmp4 Serial number: 7CB503E721 |
Updated to 7.9 M2
I have updated to version 7.9 M2 but is still experiencing the same problem unfortunately.
|
Any news regarding this issue?
|
Hi,
Thanks for posting the video. I'm going to raise this internally for further investigation but wondered if you'd answer these questions before I do: Do you always get the corruption shown in it? Or do you need to run through specific steps to get it? i.e. Reboot, log off and on, sleep-resume? If you have another PC could you try and see if you can reproduce this issue with the same dock and monitors? If you increase the resolution of the Spectre screen do you still see the corruption? If you decrease the resolution of the external monitors do you still see the corruption? From the logs I can see you have a Dell U2410 - can you let me know what the other monitor make and model is? Many thanks, James |
Please see my response below.
Quote:
|
Any news on this?
|
Have you had a chance to look into this? I have also tried with a Dell display link adapter with the same result.
|
Will check on this.
Thanks, James |
Hi,
Please try the latest graphics driver for your HP notebook available from this link: http://h20564.www2.hp.com/hpsc/swd/p...&swEnvOid=4192 Also can you let me know if this issue persists after upgrading to v7.9M3? You can download this from here: http://www.displaylink.com/downloads/downloads.php Thanks, James |
1 Attachment(s)
Hi!
I have tested the latest driver for both the laptop and the displaylink adapter without success. I ran the support tool once more so that you have fresh data. |
Any news on this?
|
Any news on this?
|
Downgrade to resolve flickering
As an FYI, I had a similar problem and downgraded to M3 that solved the problem. Steps taken:
- Disconnect USB - Uninstall software and graphics entry in Control Panel - Reboot - Carry out Clean Uninstall (http://www.displaylink.com/downloads/file?d=64) - Install M3 version - Connect USB when asked - Reboot. Hope this helps. |
Did you have these problems prior to M4 as well? I have had them since 7.9 M0 so it sounds strange that it could be solved by downgrading to M3 but I can give it a try.
|
Quote:
I've just looked at this video and this looks like a hardware problem; specifically the memory in the dock, used to hold the video frame buffer is faulty. It does not look like a driver issue. Wim |
Flickering/Freezing Display - Solution
I had the same issue where my computer was unusable when hooked up to the dynadock due to flickering. I tried this solution on the hp forum and it actually worked!
" NualaMa 18:21 PM 06 Aug 15 There is a simple fix Open task manager ... under file (top left) "Run new task" ... type msconfig (yes it is hard to type as screen blinks, but it can be done) ... In the new box that opens (it may be behind the task manager box) go to Service Tab .... Scroll until you find 2 tasks that need to be stopped ... (1) Problem Reports and Solution Control Panel Support .... (2) Windows Error Report Service.... Disable these by unchecking .... Click Apply ... Click OK ... If you are prompted to restart, then restart computer ..... This is the main issue causing the screen to blink . .. Ironic that the items causing the errors are the solutions designed to report errors to microsoft" |
Quote:
|
Quote:
|
| All times are GMT. The time now is 10:18 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2026, vBulletin Solutions, Inc.