DisplayLink Forum

DisplayLink Forum (https://displaylink.org/forum/index.php)
-   Windows Software (https://displaylink.org/forum/forumdisplay.php?f=28)
-   -   Dell D6000, Displayport has stopped working after 6 months (https://displaylink.org/forum/showthread.php?t=67045)

dalick 04-03-2020 02:06 PM

Dell D6000, Displayport has stopped working after 6 months
 
1 Attachment(s)
Hi,

I have dual fujitsu 24" monitors with DP,VGA and DVI. I got the Dell D6000 about 6 months ago and have used this inte my home office several times a week with since then.
This morning I wanted to use my laptop as a third display and downloaded the displaylink drivers to get this working. When back from lunch the monitors were black with a message - "No source detected".
I tried rebooting computer, docking station, monitors several times and disconnecting everything in the dock. Still not working.
Updated the frimware on the d6000, still not working.
Uninstalled the displaylink drivers. still not working.
Then I connected my TV-screen to the d6000 with HDMI, this worked flawlessly!
I have tried connecting 3 different laptops and none of them get any display on the monitors through the d6000.

So I have came to the conclusion that either the DP in the dell 6000 somehow broke when I downloaded the displaylink drivers and connected my monitor as a third screen.
OR
My monitors does not support the displaylink driver or the d6000. But then how could it work for 6 months? And why did it not start working when I uninstalled the displaylink drivers?

Here is a log, from the support-tool, many thanks for helping.

dalick 04-06-2020 08:50 PM

Still not working.
I have tried connecting 4 different laptops and none of them recognize the d6000 in the device manager.

KatarzynaCzaja 04-17-2020 10:29 AM

Hello,

Dalick, I reached out to you through email as I'd like to make the communication in your case a bit more efficient.

Best regards,
Katarzyna

gteibo 05-04-2020 12:24 AM

Quote:

Originally Posted by dalick (Post 89610)
Still not working.
I have tried connecting 4 different laptops and none of them recognize the d6000 in the device manager.

Hi! did you found any solution?

I'm facing the same problem right now. Also in device Managers i don't have any DisplayLink device.

Win 10 is recognizing my deck as bulk of generic USB ports. (Dell D6000)

KatarzynaCzaja 05-04-2020 12:47 PM

Quote:

Originally Posted by gteibo (Post 89767)
Hi! did you found any solution?

I'm facing the same problem right now. Also in device Managers i don't have any DisplayLink device.

Win 10 is recognizing my deck as bulk of generic USB ports. (Dell D6000)

Hello,

Thank you for reaching out to us!
As usually those issues are case specific I'd like to take a better look at your configuration. Would you be able to gather logs for further analysis?
You can do that by following steps here: https://www.displaylink.com/downloads/windows

Thank you,
Katarzyna

TJBuchanan 01-06-2022 08:24 PM

Fix?
 
Hello,
I am having the same issue as above and was wondering if a fix has been determined.

Thanks!

jccarmichael 02-09-2022 10:47 PM

I'm having the same issue. Please advise.
 
My Dell Dock D6000 has been working just fine for about 8 months, but upon startup two days ago it's as if the display ports don't even exist. I keep everything plugged into the dock, and it never moves. My Dell XPS 13 9380 laptop stays plugged into the dock most of the time, and I occasionally disconnect it to take it to another part of the house. I've never experienced these issues with this arrangement.

Device manager doesn't see any display ports. The laptop seems to "think" everything is fine. I'm getting USB activity through the dock, just not any signal out through the display ports, each of which has a Dell monitor plugged into it.

I'm running Windows 10. I recently had several updates complete, but everything was working after them. I have verified that my dock has the most up to date firmware, and my laptop is fully updated (including bios and drivers). I'm desperately in need of a solution.

YannickAaron 05-14-2022 06:56 PM

Same Problem on MacOs
 
I am literally encountering the same problem on Mac. Was working fine for the last 7 Months, suddenly stopped working. Tried different devices, even my old windows laptop...nothing. Also none of them seems to recognise the device, what is odd considering that the update software for the firmware on the windows laptop does...

Timb23 05-18-2022 02:43 AM

Same!
 
Have what seems to be the same problem (also posted in a different thread but with no responses). I have a D6000 that powers up, outputs power, can be firmware updated, but is not detected on multiple computers (Windows and Mac) despite all drivers being installed

KatarzynaCzaja 05-18-2022 09:46 AM

Hello,

Please keep in mind that each of the cases most likely has a different root cause therefore each case has to be reviewed individually. We encourage you to contact our support directly by sending an email to technical-enquiries@synaptics.com with detailed problem description and logfiles. To do that follow this article:
How can I report Windows issues to DisplayLink?


Thank you,
Katarzyna


All times are GMT. The time now is 01:15 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.