DisplayLink Forum

DisplayLink Forum (https://displaylink.org/forum/index.php)
-   Windows Software (https://displaylink.org/forum/forumdisplay.php?f=28)
-   -   How to disable video portion and only keep Ethernet, USB and Audio? (https://displaylink.org/forum/showthread.php?t=62312)

dmitryr 12-10-2013 10:18 AM

How to disable video portion and only keep Ethernet, USB and Audio?
I have a Targus USB 3.0 docking station ACP71USZ and Asuz laptop with Intel 5000 graphics and mini Display Port video output.

I want to use my hi-res miniDP port to feed hi-res monitor and use Targus only for USB, Audio and Ethernet.

I have DisplayLink software v7.5M0 on Windows 8.1

Every time I connect to the docking station it deactivates the signal to my external monitor via miniDP output and I forced to use lower-res Targus video output. Disabling Targus USB Monitor and DisplayLink USB Monitor devices in Windows Device Manager will not help.

Once I stop DisplayLink Windows service, the signal to the monitor immediately activates, but Ethernet, Audio and USB ports on Targus become inactive.

How can I use my laptop's video output together with the Targus docking station?
Can I disable video functionality of Display Link and just keep the rest?

Wim 12-11-2013 11:43 AM

You should be able to disable the video device under "USB Display Adapters" in device manager. This disables the USB driver for the video part.


dmitryr 12-12-2013 12:42 AM

I tried to disable USB Display Adapter in the Device Manager. It has no effect. The moment docking station is plugged in, the Video output from internal HDMI/DP is deactivated.
If I stop DisplayLink service and connect the docking station, the video output from internal HDMI/DP works normally, but USB/Ethernet ports on the docking station do not work.

All times are GMT. The time now is 01:17 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2022, vBulletin Solutions, Inc.