DisplayLink Forum

DisplayLink Forum (https://displaylink.org/forum/index.php)
-   Mac Software (https://displaylink.org/forum/forumdisplay.php?f=30)
-   -   Mojave and 5.0.1 drivers (https://displaylink.org/forum/showthread.php?t=66333)

jipidou 10-24-2018 09:17 PM

Mojave and 5.0.1 drivers
 
Hi, we have 2015/2016 and 2017 macbook pro models and since 10.13.4, even with 10.14, we cannot have more than one monitor working if the docking have port that doest work with displaylink. If all port use display link, then no monitor will works....
We tried several versions of displaylink but it's all the same for us, the monitor will flicker but nothing show on it, not even the cursor...
So I did a few search and went across this steps and it's working!
So if will disabled she SIP protection, allow display link (need to be installed) and then you enable SIP back.

-From the Apple menu select Restart.
-As your Mac restarts, press and hold down the Command(⌘) + R keys immediately upon hearing the startup chime. Hold the keys until the Apple logo appears to get the computer in Recovery mode.
-The computer is now in Recovery mode. From the Apple menu select Utilities -> Terminal
-Run the command: csrutil disable
-From the Apple menu, select Restart.
-After the macOS is loaded, open terminal and type: sudo kextcache -invalidate /
-- In theory this should work too : sudo kextcache -invalidate /Library/StagedExtensions/Library/Extensions/DisplayLinkDriver.kext
-From the Apple menu, select Restart.
-As your Mac restarts, press and hold down the Command(⌘) + R keys immediately upon hearing the startup chime. Hold the keys until the Apple logo appears to get the computer in Recovery mode.
-The computer is now in Recovery mode. From the Apple menu select Utilities -> Terminal
-Run the command: csrutil enable
-From the Apple menu, select Restart.

And now everything will work!

MacMiniUser 10-29-2018 12:28 PM

This should be in the user instructions !!!

Great work, only thing that made it work for me.

icedub 11-01-2018 01:44 AM

Thank you so much! This worked for me on my 2015 mac mini running 10.14. I was about to give up hope.

Have you updated to 10.14.1 yet?

jipidou 11-02-2018 01:16 PM

not yet...
I'll try it at the beginning of next week and let you know if it's still working.

EDIT : Ok I did it and it's still working without doing anything

pjkirby 11-05-2018 06:15 AM

Thanks
 
I registered just to say that this solution worked for me as well. I'm currently using a 2016 Macbook Pro with Mojave 10.14. I followed the instructions given from this post and it worked like a charm. Thanks! :D

matthewd 12-07-2018 10:20 PM

Thank you!
 
This solution worked for me too! Almost gave up on getting a dual monitor setup to work with my Macbook Air 2017 and with Mojave 10.14.1

Also registered just to comment. Thanks!

alexdmoney 12-12-2018 03:18 PM

2017 MBP 15": Updated from 10.13.3 to 10.14.2, confirmed working w/o DL Driver update
 
https://displaylink.org/forum/showpo...9&postcount=14


All times are GMT. The time now is 11:10 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.