10.8, log says "DID NOT FIND VRAM"
 

The screen stays black when I plug in my NewerTech DL adapter.

I'm using version 1.8 (39186). I installed it after installing 10.8 clean on a new SSD. This is a MacBook Pro mid-2009 17".

Every once in a while it flickers but it never shows a screen. A monitor does not appear in the Displays Preferences Arrangement tab.

The display and adapter work with Lion.

2012-07-31 1:09:52.000 PM kernel[0]: USBF: 306519.418 [0xffffff80177dfc00] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 2 of Hub at 0x26000000)
2012-07-31 1:09:52.000 PM kernel[0]: USBF: 306520.158 [0xffffff80177dfc00] The IOUSBFamily has successfully enumerated the device.
2012-07-31 1:09:52.000 PM kernel[0]: Can't load kext com.apple.driver.AppleUSBCDC - requests to user space are disabled.
2012-07-31 1:09:52.000 PM kernel[0]: Couldn't alloc class "AppleUSBCDC"
2012-07-31 1:09:53.000 PM kernel[0]: Can't load kext com.apple.iokit.IOUSBMassStorageClass - requests to user space are disabled.
2012-07-31 1:09:53.000 PM kernel[0]: Couldn't alloc class "IOUSBMassStorageClass"
2012-07-31 1:09:54.000 PM kernel[0]: DisplayLinkFramebuffer( 502)::DisplayLinkFramebufferGetDisplayMemory: no memory
2012-07-31 1:09:54.000 PM kernel[0]: DisplayLinkUserClient::start DID NOT FIND VRAM
2012-07-31 1:09:54.000 PM kernel[0]: DisplayLinkFramebuffer( 503)::DisplayLinkFramebufferGetDisplayMemory: no memory
2012-07-31 1:09:54.000 PM kernel[0]: DisplayLinkUserClient::start DID NOT FIND VRAM
2012-07-31 1:09:54.000 PM kernel[0]: DisplayLinkFramebuffer( 504)::DisplayLinkFramebufferGetDisplayMemory: no memory
2012-07-31 1:09:54.000 PM kernel[0]: DisplayLinkUserClient::start DID NOT FIND VRAM
2012-07-31 1:09:55.000 PM kernel[0]: DisplayLinkFramebuffer( 505)::DisplayLinkFramebufferGetDisplayMemory: no memory
2012-07-31 1:09:55.000 PM kernel[0]: DisplayLinkUserClient::start DID NOT FIND VRAM

It's working?
 

I rebooted my MBP today (let the battery run out whoops), and shortly after logging in, I saw my screens (internal and displayport) go black for a second. I've seen that happen before with DisplayLink installed, so I decided to try plugging it in again.

It's working again!