DisplayLink Not working after macos 15 sequoia?
 

Hello,
Display link dual monitor setup was working perfectly before this update. Now, neither monitor is detected and no signal is being given to the monitors. Works individually without display link, so I think it's some interaction with that but not sure. lmk if anyone has a solution.

Hello!
Have you checked if Screen Recording Permission is still granted and the USB device can access the System? You can always use our End-User Cleaner and then once again install DisplayLink Manager 1.11.0

If this does not solve your problem, please contact us directly using the form in the DisplayLink Manager.

I did what you said and it fixed my issue. Thanks!

I did what you said and it resolved my issue until the next restart. Please see my notes here for additional information and observations: https://www.displaylink.org/forum/sh...3&postcount=10

Similar issue! Displaylink Crashes Multiple Times
 

Hi, I have a similar issue. When I connect my computer display link works for a couple seconds then continuously crashes and tries again.

I've done the clean up and update to the most recent displaylink version. Restarted multiple times. Still nothing worked.

Everything was working fine until my mac book auto updated to Sequoia 15.2

Any suggestions? :confused:

Current setup:
- Macbook Air 2022 - M2 Chip - Sequoia 15.2
- Wavlink Dock WL-UG69PD2 (Uses Displaylink)
- 1 ultrawide Samsung Neo Mini Monitor (using PNP to work as 2 separate monitors)

After upgrading MacOs to Seqioa, the accesssibility feature to zoom into screen no longer works on the extended desktops. The picture-in-picture box still appears and zoom still works on the main display, but not the two moniters I have connected using a StarTech docking station and DisplayLink Manager app. How can this be resolved?

Hello Mborbolla,

Thank you for reaching out.

We will take a closer look at this issue and come back with a proper response.

Hello Mborbolla,

After taking a closer look, we do confirm that the problem occurs with the picture-in-picture box.
While we will be taking steps to fix this issue, please try to install DisplayLink Manager app in version 1.9.0. Till the solution of this problem, this function will work on 1.9.0 version.

We are very sorry for this inconvenience.

Same issue here. I've used the End User Cleaner and reinstalled Display link 11 as well and no luck. Since updating to Sequoia 15.3.2 and updating to Displaylink 12, the Displaylink is acting as if the thunderbolt cable is being unplugged and plugged back in again every 45 seconds or so. I know the issue does not lie in the hardware as I have tested the cable with my Iphone plugged into the dock and it will hold a consistent connection with the Iphone and both thunderbolt inputs on the Macbook are operating correctly as well.

Current Setup:
- Macbook Pro M4 - Sequoia 15.3.2
- Wavlink Dock WL-UG69PD 24
- 2 LG UltraFine Monitor 27" 4K UHD 60Hz 5 ms IPS Monitor (27US500-W) connected via DisplayPort

*** Note from volunteer admin - Please do not double-post about a single issue. I have replied to your other post with the suggested next steps ***