DisplayLink Forum - View Single Post - Win7 x64 was working before, can't get display

Wim · 06-07-2011, 09:59 AM

Hi

The problem is that the chip hasn't booted up correctly. If you unplug all the cables, then connect USB, then DVI, it should work again.

Wim

06-07-2011, 09:59 AM	#2
Wim Senior Member Join Date: Feb 2009 Posts: 1,561	Hi The problem is that the chip hasn't booted up correctly. If you unplug all the cables, then connect USB, then DVI, it should work again. Wim