DisplayLink Forum - View Single Post - Win 8 Display link ... 'power saving mode'

JamesH · 10-20-2013, 05:29 PM

Hi,

It's worth checking if you have the latest hub firmware programmed for this dock.

Open up device manager, open up Universal Serial Bus controllers and right click on the entry called “Generic SuperSpeed USB Hub”.
Select “Properties”, select “Details”, change “Property” to “Hardware Ids” and the REV_xxxx value will tell you what version of firmware is programmed on the hub. For this dock the latest version is REV_0982.

If you don't see this listed you can get the firmware from here:
http://support.lenovo.com/en_US/guid...DocID=UM014961

Thanks,
James

10-20-2013, 05:29 PM	#3
JamesH Senior Member Join Date: Jan 2012 Posts: 1,523	Hi, It's worth checking if you have the latest hub firmware programmed for this dock. Open up device manager, open up Universal Serial Bus controllers and right click on the entry called “Generic SuperSpeed USB Hub”. Select “Properties”, select “Details”, change “Property” to “Hardware Ids” and the REV_xxxx value will tell you what version of firmware is programmed on the hub. For this dock the latest version is REV_0982. If you don't see this listed you can get the firmware from here: http://support.lenovo.com/en_US/guid...DocID=UM014961 Thanks, James