DisplayLink Forum - View Single Post

Wim · 11-10-2014, 03:21 PM

The display settings are stored by Windows, not DisplayLink, so you won't find these in our registry area. However you can change the default behaviour when a new device (and I think a new monitor) are connected. To do this:

First follow this FAQ to make sure you have a registry entry for the product you want to control.
Under each PID, you will see a ProductCode registry entry. There should be a matching ProductCode under Products->Product Name (Probably "DisplayLink Graphics")
Under here, you will see an OnNewDevice key and under here there is a string for Rotation which is set to 0. This can be 90,180 or 270 to rotate screen by default.

After you restart the DL service, and new device connected should have the new rotation setting applied to it by default.

Wim

11-10-2014, 03:21 PM	#2
Wim Senior Member Join Date: Feb 2009 Posts: 1,561	The display settings are stored by Windows, not DisplayLink, so you won't find these in our registry area. However you can change the default behaviour when a new device (and I think a new monitor) are connected. To do this: First follow this FAQ to make sure you have a registry entry for the product you want to control. Under each PID, you will see a ProductCode registry entry. There should be a matching ProductCode under Products->Product Name (Probably "DisplayLink Graphics") Under here, you will see an OnNewDevice key and under here there is a string for Rotation which is set to 0. This can be 90,180 or 270 to rotate screen by default. After you restart the DL service, and new device connected should have the new rotation setting applied to it by default. Wim