Hello,
There isn't enough information in your post to give you a definite answer on the current problem, unfortunately.
My forum signature includes a link on how to give the log files for analysis.
This is not up to the device to claim which driver to install, that's the OS job, otherwise any malicious company could hijack your devices and log your network traffic, or displayed content. The OS makes the choice based on its driver store, and depending on your machine settings and Windows version, the date/version number and status (optional, recommended, important, critical...) from Windows Update (WU).
Random loss of sound or Ethernet driver during update cannot be from the driver: either it is not formed properly and it never works, or if it worked once, then it is formed properly. DisplayLink Ethernet and audio drivers are signed by Microsoft. To get this signature, they MUST pass the Windows hardware qualification... so they have to be formed properly.
The DisplayLink sound and Ethernet drivers are very simple. If the driver works when manually selected and sometimes automatically, then I have issues understanding how it could be the drivers' fault. I'm open to suggestions though.
Here is a shorter way to assigning the drivers manually when Windows doesn't do it. I have personally received a third party Ethernet and a third party audio driver update once in the 6 years I've had my home machine, so I am unable to compare success rate.
Maybe your driver store is corrupted.
Loss of USB: I don't understand. DisplayLink doesn't do USB hubs, if you are referring to the USB sockets on your Dynadock. DisplayLink is a semiconductor vendor, we do a chip which is designed in by companies like Toshiba and it is plugged into a USB hub, like your keyboard or mouse would be.
Our driver, or firmware don't have any control over the USB hub and ports on the dock.
The DisplayLink chip is a complex USB device. Therefore it tends to show shortcomings in the USB host controller and BIOS, even with us being USB compliant... That's why the DisplayLink chip in most docks is part of the USB gold tree used to test the USB testers.
Could you please clarify what you mean by "loss of USB" so I can give relevant advice?
Loss of display. This one I claim responsibility for! The reason is extremely simple: the Windows graphics subsystem is complex. Until Windows 10 TH2, we MUST work in tandem with the primary graphics card... If there is a slight disconnect, then we don't get any pixel (ON but blank monitor) or worse, Windows trips on the carpet. If the Windows Update is not completing properly with the co-installer (or if you have WU on a Corporate Deployment), then it is likely to stop working.
From 8.0 on Windows 7 up to Windows 10 TH2 (builds <=10586), we are addressing this with what I'll call a side-by-side installer: instead of modifying the core files during the update, we keep the current files and make the update at the following reboot. This also means you don't have to reboot immediately as you can keep using the external monitors (on the old driver). Thanks to this side-by-side, a corporate deployment can also be updated by Windows Update. It wasn't possible before because the driver store was locked by WU.
On the longer term, we have been working with Microsoft on that and are offering a much more resilient and simple solution on Windows 10 anniversary update (builds >14200). If you have the willingness, you can try today with 8.0 Beta 4 and the Windows Insiders program fast ring, with the understanding that this is beta software on a new feature of a beta OS.
I hope this gives you a bit of clarification on what is happening, and how we are working to improve things for you all, including ourselves as all DisplayLink employees have products using the technology on their desk.
If you give me the logs, I will be delighted to look at the issue at hand: the 7.9 M7 not working.
Kind regards,
Alban