DisplayLink Forum - View Single Post - Want USB to HDMI Adapter that supports DDC/CI Brightness Contrast

uit · 12-14-2020, 09:12 AM

I'm looking for a USB to HDMI 1080p adapter (only, no other ports needed) that supports DDC/CI, which is the ability to adjust a connected monitor's settings, like Brightness and Contrast from a PC, instead of fiddling with a monitor's physical control buttons.

For example, using this Windows program:
Nirsoft Control My Monitor
http://www.nirsoft.net/utils/control_my_monitor.html

I've tried all these adapters, but none of them work with Nirsoft Control My Monitor.

WAVLINK USB 3.0 to HDMI Display Adapter with DisplayLink Chipset DL5500
https://www.amazon.com/gp/product/B07TB7N3X7

Nekteck USB 3.0 to HDMI 4K UHD with DisplayLink DL5500
https://amazon.com/gp/product/B06WWFF1MC

USB 3.0 to HDMI Adapter with Fresco Logic driver
https://amazon.com/gp/product/B089KM3P5T

Interestingly, a very old VillageTronic USB to HDMI adapter works with Nirsoft Control My Monitor, but that adapters maximum resolution is 1280x1024. :-(

For those of you with USB to HDMI adapters, would you consider running the Nirsoft Control My Monitor to check if it's able to access your monitor, please? If a red colored error code appears at the bottom of the Nirsoft program, it was unable to access the monitor.

Thanks!

12-14-2020, 09:12 AM	#1
uit Junior Member Join Date: Sep 2018 Posts: 15	Want USB to HDMI Adapter that supports DDC/CI Brightness Contrast I'm looking for a USB to HDMI 1080p adapter (only, no other ports needed) that supports DDC/CI, which is the ability to adjust a connected monitor's settings, like Brightness and Contrast from a PC, instead of fiddling with a monitor's physical control buttons. For example, using this Windows program: Nirsoft Control My Monitor http://www.nirsoft.net/utils/control_my_monitor.html I've tried all these adapters, but none of them work with Nirsoft Control My Monitor. WAVLINK USB 3.0 to HDMI Display Adapter with DisplayLink Chipset DL5500 https://www.amazon.com/gp/product/B07TB7N3X7 Nekteck USB 3.0 to HDMI 4K UHD with DisplayLink DL5500 https://amazon.com/gp/product/B06WWFF1MC USB 3.0 to HDMI Adapter with Fresco Logic driver https://amazon.com/gp/product/B089KM3P5T Interestingly, a very old VillageTronic USB to HDMI adapter works with Nirsoft Control My Monitor, but that adapters maximum resolution is 1280x1024. :-( For those of you with USB to HDMI adapters, would you consider running the Nirsoft Control My Monitor to check if it's able to access your monitor, please? If a red colored error code appears at the bottom of the Nirsoft program, it was unable to access the monitor. Thanks!