View Single Post
Old 10-24-2018, 09:17 PM   #1
jipidou
Junior Member
 
Join Date: Oct 2018
Posts: 3
Default Mojave and 5.0.1 drivers

Hi, we have 2015/2016 and 2017 macbook pro models and since 10.13.4, even with 10.14, we cannot have more than one monitor working if the docking have port that doest work with displaylink. If all port use display link, then no monitor will works....
We tried several versions of displaylink but it's all the same for us, the monitor will flicker but nothing show on it, not even the cursor...
So I did a few search and went across this steps and it's working!
So if will disabled she SIP protection, allow display link (need to be installed) and then you enable SIP back.

-From the Apple menu select Restart.
-As your Mac restarts, press and hold down the Command(⌘) + R keys immediately upon hearing the startup chime. Hold the keys until the Apple logo appears to get the computer in Recovery mode.
-The computer is now in Recovery mode. From the Apple menu select Utilities -> Terminal
-Run the command: csrutil disable
-From the Apple menu, select Restart.
-After the macOS is loaded, open terminal and type: sudo kextcache -invalidate /
-- In theory this should work too : sudo kextcache -invalidate /Library/StagedExtensions/Library/Extensions/DisplayLinkDriver.kext
-From the Apple menu, select Restart.
-As your Mac restarts, press and hold down the Command(⌘) + R keys immediately upon hearing the startup chime. Hold the keys until the Apple logo appears to get the computer in Recovery mode.
-The computer is now in Recovery mode. From the Apple menu select Utilities -> Terminal
-Run the command: csrutil enable
-From the Apple menu, select Restart.

And now everything will work!
jipidou is offline   Reply With Quote