DisplayLink Drivers (9.2 M2) Windows 10 Insider build 1903 18999.1 & AOC e1659Fwu

[tonyfl]

I am also a an actie windows insider tester, and also on 1903. It broke again with this update. Ihave installed several USB debugging softwares to see if i can fix this myself with no luck so far. I really need this to work , as i travel allot and my AOC monitor stopped working.

Displaylink please advise on what we can do to fix this,

below in my software and HW info

[tonyfl]

Here is the debug info i was able to pull from USB view from windows SDK

[Port14] FailedEnumeration :  Unknown USB Device (Port Reset Failed)


Is Port User Connectable:         yes
Is Port Debug Capable:            yes
Companion Port Number:            2
Companion Hub Symbolic Link Name: USB#ROOT_HUB30#4&300f60a4&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
Protocols Supported:
 USB 1.1:                         no
 USB 2.0:                         no
 USB 3.0:                         yes

    ---===>Device Information<===---

ConnectionStatus:                  FailedEnumeration
Current Config Value:              0x00  -> Device Bus Speed: SuperSpeed
Device Address:                    0x00
Open Pipes:                           0
*!*ERROR:  No open pipes!

          ===>Device Descriptor<===
*!*ERROR:  bLength of 0 incorrect, should be 18
bLength:                           0x00
bDescriptorType:                   0x00
bcdUSB:                          0x0000
bDeviceClass:                      0x00
*!*ERROR:  Device enumeration failure