01-28-2016, 03:06 PM | #1 |
Junior Member
Join Date: Jan 2016
Posts: 5
|
DisplayLink for J5create JUA355 on Archlinux
Hello,
I have got a USB 3.0 j5create JUA355 (USB to HDMI) recently and I have followed Archlinux wiki documentation with no luck to make it work. Any suggestions? I might be missing some steps or details, please have a look and let me know if I should provide more information or perform a step that I have missed. Code:
$ lsusb -d 0711:5800 -vvv Output is on pastebin: http://pastebin.com/hnKmfatq Code:
$ dmesg [16439.983047] usb 2-3: USB disconnect, device number 6 [16449.697476] usb 2-3: new SuperSpeed USB device number 7 using xhci_hcd [16454.718031] usb 2-3: 2:1: cannot get freq at ep 0x85 [16459.721969] usb 2-3: 3:1: cannot get freq at ep 0x6 [16464.765968] usb 2-3: 2:1: cannot get freq at ep 0x85 [16469.769952] usb 2-3: 2:1: cannot get freq at ep 0x85 [16474.777284] usb 2-3: 3:1: cannot get freq at ep 0x6 [16479.781253] usb 2-3: 3:1: cannot get freq at ep 0x6 [16484.785172] usb 2-3: 2:1: cannot get freq at ep 0x85 [16489.789123] usb 2-3: 2:1: cannot get freq at ep 0x85 [16494.806432] usb 2-3: 3:1: cannot get freq at ep 0x6 [16499.810397] usb 2-3: 3:1: cannot get freq at ep 0x6 [16504.821001] usb 2-3: 2:1: cannot get freq at ep 0x85 [16509.824965] usb 2-3: 2:1: cannot get freq at ep 0x85 Code:
$ lsmod|grep udl udl 28672 0 drm_kms_helper 102400 3 udl,i915,evdi drm 286720 16 udl,i915,evdi,drm_kms_helper,nvidia usbcore 196608 10 uas,udl,btusb,snd_usb_audio,uvcvideo,usb_storage,snd_usbmidi_lib,usbhid,xhci_hcd,xhci_pci Code:
$ sudo systemctl status displaylink.service [sudo] password for neo31: ● displaylink.service - DisplayLink Manager Service Loaded: loaded (/usr/lib/systemd/system/displaylink.service; enabled; vendor preset: disabled) Active: active (running) since Thu 2016-01-28 15:39:58 CET; 1h 26min ago Main PID: 16994 (DisplayLinkMana) Tasks: 11 (limit: 512) CGroup: /system.slice/displaylink.service └─16994 /usr/lib/displaylink/DisplayLinkManager Jan 28 15:39:58 thehammer systemd[1]: Starting DisplayLink Manager Service... Jan 28 15:39:58 thehammer systemd[1]: Started DisplayLink Manager Service. Code:
$ xrandr --current Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767 eDP1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 293mm x 165mm 1920x1080 60.00*+ 40.00 1400x1050 59.98 1600x900 60.00 1280x1024 60.02 1280x960 60.00 1368x768 60.00 1280x720 60.00 1024x768 60.00 1024x576 60.00 960x540 60.00 800x600 60.32 56.25 864x486 60.00 640x480 59.94 720x405 60.00 640x360 60.00 DP1 disconnected (normal left inverted right x axis y axis) HDMI1 disconnected (normal left inverted right x axis y axis) HDMI2 disconnected (normal left inverted right x axis y axis) VIRTUAL1 disconnected (normal left inverted right x axis y axis) Code:
$ sudo xrandr --listproviders Providers: number : 1 Provider 0: id: 0x48 cap: 0xb, Source Output, Sink Output, Sink Offload crtcs: 4 outputs: 5 associated providers: 0 name:Intel also on dmesg log there are two suspicious lines: [16454.718031] usb 2-3: 2:1: cannot get freq at ep 0x85 [16459.721969] usb 2-3: 3:1: cannot get freq at ep 0x6 I tried to connect it on USB2 and USB3 ports and the logs and results are the same. Last edited by asghaier; 01-28-2016 at 03:19 PM. |
01-28-2016, 03:24 PM | #2 |
Junior Member
Join Date: Jan 2016
Posts: 5
|
DisplayLink issues for J5create JUA355 on Archlinux
Hello,
I have got a USB 3.0 j5create JUA355 (USB to HDMI) recently and I have followed Archlinux wiki documentation with no luck to make it work. Any suggestions? I might be missing some steps or details, please have a look and let me know if I should provide more information or perform a step that I have missed. Code:
$ lsusb -d 0711:5800 -vvv Output is on pastebin: http://pastebin.com/hnKmfatq Code:
$ dmesg [16439.983047] usb 2-3: USB disconnect, device number 6 [16449.697476] usb 2-3: new SuperSpeed USB device number 7 using xhci_hcd [16454.718031] usb 2-3: 2:1: cannot get freq at ep 0x85 [16459.721969] usb 2-3: 3:1: cannot get freq at ep 0x6 [16464.765968] usb 2-3: 2:1: cannot get freq at ep 0x85 [16469.769952] usb 2-3: 2:1: cannot get freq at ep 0x85 [16474.777284] usb 2-3: 3:1: cannot get freq at ep 0x6 [16479.781253] usb 2-3: 3:1: cannot get freq at ep 0x6 [16484.785172] usb 2-3: 2:1: cannot get freq at ep 0x85 [16489.789123] usb 2-3: 2:1: cannot get freq at ep 0x85 [16494.806432] usb 2-3: 3:1: cannot get freq at ep 0x6 [16499.810397] usb 2-3: 3:1: cannot get freq at ep 0x6 [16504.821001] usb 2-3: 2:1: cannot get freq at ep 0x85 [16509.824965] usb 2-3: 2:1: cannot get freq at ep 0x85 Code:
$ lsmod|grep udl udl 28672 0 drm_kms_helper 102400 3 udl,i915,evdi drm 286720 16 udl,i915,evdi,drm_kms_helper,nvidia usbcore 196608 10 uas,udl,btusb,snd_usb_audio,uvcvideo,usb_storage,snd_usbmidi_lib,usbhid,xhci_hcd,xhci_pci Code:
$ sudo systemctl status displaylink.service [sudo] password for neo31: ● displaylink.service - DisplayLink Manager Service Loaded: loaded (/usr/lib/systemd/system/displaylink.service; enabled; vendor preset: disabled) Active: active (running) since Thu 2016-01-28 15:39:58 CET; 1h 26min ago Main PID: 16994 (DisplayLinkMana) Tasks: 11 (limit: 512) CGroup: /system.slice/displaylink.service └─16994 /usr/lib/displaylink/DisplayLinkManager Jan 28 15:39:58 thehammer systemd[1]: Starting DisplayLink Manager Service... Jan 28 15:39:58 thehammer systemd[1]: Started DisplayLink Manager Service. Code:
$ xrandr --current Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767 eDP1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 293mm x 165mm 1920x1080 60.00*+ 40.00 1400x1050 59.98 1600x900 60.00 1280x1024 60.02 1280x960 60.00 1368x768 60.00 1280x720 60.00 1024x768 60.00 1024x576 60.00 960x540 60.00 800x600 60.32 56.25 864x486 60.00 640x480 59.94 720x405 60.00 640x360 60.00 DP1 disconnected (normal left inverted right x axis y axis) HDMI1 disconnected (normal left inverted right x axis y axis) HDMI2 disconnected (normal left inverted right x axis y axis) VIRTUAL1 disconnected (normal left inverted right x axis y axis) Code:
$ sudo xrandr --listproviders Providers: number : 1 Provider 0: id: 0x48 cap: 0xb, Source Output, Sink Output, Sink Offload crtcs: 4 outputs: 5 associated providers: 0 name:Intel also on dmesg log there are two suspicious lines: [16454.718031] usb 2-3: 2:1: cannot get freq at ep 0x85 [16459.721969] usb 2-3: 3:1: cannot get freq at ep 0x6 I tried to connect it on USB2 and USB3 ports and the logs and results are the same. |
01-29-2016, 07:36 AM | #3 |
Senior Member
Join Date: Feb 2010
Posts: 386
|
Sorry to disappoint, but this device does not have DisplayLink chip in it. (our USB vendor ID is 17e9).
Regards, Michal |
01-29-2016, 12:53 PM | #4 | |
Junior Member
Join Date: Jan 2016
Posts: 5
|
Quote:
Thank you for clearing things out. Do you think there is any way that I could try to make this device work? Any recommendation would be very helpful. Thanks again |
|
|
|