Ethernet not working on D3000 after win 10 and 7.9 driver installation

MUrban · 07-30-2015, 07:35 PM

Hi,

I have just upgraded from Win 8.1 to Win 10, and updated the displaylink drivers to 7.9. Everything seems to work just ok although I am a bit disappointed by removing the fast option to change modes of dual monitors, BUT my ethernet connection when the ethernet cable is connected to the docking station stopped working. The computer does not recognize the cable plugged in at all. If i plug the cable directly to the computer ethernet port, it works fine.

I've never had these issues with the previous "god knows what" version of your drivers i was running under win 8.1

I can live with plugging the ethernet cable directly to the computer for some time, but i would appretiate some kind fix for this.

I did buy the docking station to reduce the amount of cables needed to be plugged to the computer to minimum, but it seems that with Win 10 and 7.9 frivers i've also upgraded the number of cables from 2 (power and usb from the dock) to 3 (+ ethernet) ... not my kind of upgrade i must say...

Anyways looking forward to see any feedback.
In case you need any details about my setup, please feel free to ask.
Manny thanks and appretiate

Regards

Martin

MUrban · 08-03-2015, 06:29 AM

Anyone? Any advice?

JamesH · 08-03-2015, 09:48 AM

Hi,

Can you try the steps in this FAQ?
http://support.displaylink.com/knowl...lation-upgrade

Thanks,
James

MUrban · 08-03-2015, 12:18 PM

Thanks James!

I will do that first thing after I come home from work.
I will post the results afterwards.

Martin

ECourts · 08-03-2015, 04:03 PM

I had the same problem after upgrading to Win10 and DisplayLink 7.9.

There were also 2 unknown devices in my Device Manager. Following the FAQ pointed to in the previous reply I was able to manually install the driver software for each of these devices from "C:\Program Files\DisplayLink Core Software" whereupon the Ethernet adapter and Audio subsystem were discovered and now subsequently work fine....

(Thanks for the tip!)

MUrban · 08-17-2015, 11:25 AM

After a couple of days I finally found a while to reinstal the drivers.
It works. Thanks again.

Cheers

Martin

08-17-2015, 11:25 AM	#6
MUrban Junior Member Join Date: Jul 2015 Posts: 4	thanks After a couple of days I finally found a while to reinstal the drivers. It works. Thanks again. Cheers Martin

08-03-2015, 06:29 AM	#2
MUrban Junior Member Join Date: Jul 2015 Posts: 4	Anyone? Any advice?

08-03-2015, 09:48 AM	#3
JamesH Senior Member Join Date: Jan 2012 Posts: 1,523	Hi, Can you try the steps in this FAQ? http://support.displaylink.com/knowl...lation-upgrade Thanks, James

08-03-2015, 12:18 PM	#4
MUrban Junior Member Join Date: Jul 2015 Posts: 4	Thanks James! I will do that first thing after I come home from work. I will post the results afterwards. Martin

08-03-2015, 04:03 PM	#5
ECourts Junior Member Join Date: Aug 2015 Posts: 1	I had the same problem after upgrading to Win10 and DisplayLink 7.9. There were also 2 unknown devices in my Device Manager. Following the FAQ pointed to in the previous reply I was able to manually install the driver software for each of these devices from "C:\Program Files\DisplayLink Core Software" whereupon the Ethernet adapter and Audio subsystem were discovered and now subsequently work fine.... (Thanks for the tip!)