The adaptor only displays the naive resolution sometimes

lazaf · 01-06-2011, 03:18 AM

Hello
I am using the adaptor output to a 22" Dell monitor.
The naive resolution of this monitor is 1680X1050.
There is a 1680X1050 option in my Display panel.
Unfortunately, the monitor goes to Energy Saving mode(blank) most of time of the time when I chose 1680X1050 (or anything higher than 1440X900).
However, when I was using it yesterday, it shows the naive resolution(1680X1050) without any problem.
So, I am wondering if it is a driver problem or the adaptor problem?
And I have attached my debug info.
Thank you very much.

dcoulson · 01-07-2011, 09:54 PM

Quote:

Originally Posted by lazaf

So, I am wondering if it is a driver problem or the adaptor problem?

Not an expert, but looking at the logs the driver is having an issue pulling EDID information from the monitor.

I would try it first with another monitor (and different cable), and perhaps try the adapter on a different system (do you have a Windows system available). Perhaps you tried these troubleshooting steps already?

My money is on a bad adapter, but I'm not 100% sure.

lazaf · 01-08-2011, 02:31 AM

thank you very much..
i tried to output the adaptor to another monitor(using two different cables).
But still only able to display up to 1440x900..
was able to display 1680x1050 only once@@..
so weird..
also i tried the adaptor on Window but still no luck..

dcoulson · 01-08-2011, 01:18 PM

Quote:

Originally Posted by lazaf

also i tried the adaptor on Window but still no luck..

I would return the adapter for a replacement, or get a refund and purchase a different adapter. Sounds like a hardware issue.

lazaf · 01-11-2011, 06:59 AM

This adaptor works with another monitor.
This is the third one but there is a ghost image and some flashing..
Hopefully, it is not a hardware problem..

dcoulson · 01-11-2011, 03:28 PM

Quote:

Originally Posted by lazaf

This adaptor works with another monitor.
This is the third one but there is a ghost image and some flashing..
Hopefully, it is not a hardware problem..

Do you have a Windows system you can try the adapter on? if not, I would be inclined to work with the retailer for replacement or refund.

lazaf · 01-13-2011, 11:12 PM

yeah, but i bought it overseas.
so it is troublesome to return..

01-08-2011, 02:31 AM	#3
lazaf Junior Member Join Date: Jan 2011 Posts: 4	thank you very much.. i tried to output the adaptor to another monitor(using two different cables). But still only able to display up to 1440x900.. was able to display 1680x1050 only once@@.. so weird.. also i tried the adaptor on Window but still no luck.. Last edited by lazaf; 01-08-2011 at 02:36 AM.

01-11-2011, 06:59 AM	#5
lazaf Junior Member Join Date: Jan 2011 Posts: 4	This adaptor works with another monitor. This is the third one but there is a ghost image and some flashing.. Hopefully, it is not a hardware problem..

01-13-2011, 11:12 PM	#7
lazaf Junior Member Join Date: Jan 2011 Posts: 4	yeah, but i bought it overseas. so it is troublesome to return..