Windows 2k8r2 (win7) + uv39 + NEC 3.0 Drivers won't install

[shdwhawk]

Hello,

I am running Windows Server 2008 R2 with NEC/renesas USB 3.0 with the latest firmware and drivers for the usb chipset. I just purchased/received two Evga uv39's to complement my three Nvidia GTX 570s. (Tested with SLI disabled)

I have tried nearly every version of the DisplayLink softare going all the way down to the latest 5 series. Windows simply will not install any drivers to the devices, and the just appear in Device Manager as "Other Devices" -> "100-U3-UV39" (Code 28). Hardware IDs state: USB\VID_17E9&PID_4300&REV_0406, USB\VID_17E9&PID_4300
- The DisplayLink service is running
- Tried USB3.0 powered hub

I am using the latest certified NVIDIA drivers: 314.22

I have also tried passing the adapter through Vmware Workstation 9 on a Windows 7 x64 guest, which yielded no determinable results.

The DisplayLink Debug Support tool reports no problems. Even "Device started correctly" passes. I am not sure what version of the DisplayLink software i used when generation the support information, since i have gone through practically every relevant version.

Any help would be greatly appreciated... Thanks!

[shdwhawk]

Noticed i don't have/didn't post a full diag/debug report output, i will do so first thing tomorrow with the latest 7 series software.

[shdwhawk]

Here is the logs... Done with 7.2M0 clean installed with correct reboot procedure. With both DisplayLink adapters plugged in.

Cheers

[shdwhawk]

THanks for helping!

[shdwhawk]

Evga uv 16+ works perfectly :\

[shdwhawk]

Thanks for looking at this