|
06-21-2023, 03:56 PM | #1 |
Junior Member
Join Date: May 2023
Posts: 7
|
Is there any fix for displaylink planned?
The problem has already risen in several topics, the developers have been ignoring the problem for more than a month or writing standard replies. There is a useless piece of iron on the table now.
Just do not write "Send us information for debugging" again. I think the information has already been sent enough, judging by the neighboring topics. Everyone somehow encountered Ventura 13.4 and DisplayLink 1.8.1, which does not see the connected displays after the update, it just manifests itself in different ways. |
07-05-2023, 05:38 PM | #2 |
Junior Member
Join Date: Jul 2023
Posts: 5
|
Did you have any luck fixing this?
|
07-06-2023, 04:18 AM | #3 |
Junior Member
Join Date: May 2023
Posts: 7
|
no all fixes were tried and the D6000 was sent to the shelf, until the displaylink developers wake up and release an update.
|
07-10-2023, 02:17 PM | #4 | |
Junior Member
Join Date: Jan 2022
Posts: 29
|
Quote:
https://support.displaylink.com/know...to-displaylink You can also send the log through DisplayLink manager if you want. Just follow the instructions under the "support" tab. |
|
07-14-2023, 01:50 PM | #5 |
Junior Member
Join Date: Jan 2022
Posts: 29
|
Update: support has created a ticket for my issue and hopes to recreate it and work on a solution. It's intermittent so I'm guessing the more logs they can receive from those having the problem the better.
|
07-20-2023, 01:53 PM | #6 |
Junior Member
Join Date: Jan 2022
Posts: 29
|
Based on posts here and replies to my emails, Daniel appears to be the only support person working on this. He sent a link to DisplayLink 1.9.
Here it is if you want to try it out. https://www.synaptics.com/products/d...9?filetype=exe |
07-21-2023, 05:09 PM | #7 |
Junior Member
Join Date: May 2023
Posts: 7
|
unfortunately 1.9 and 1.10(A) did not help. I also tried to reset the layout settings through the support application
|
07-22-2023, 04:14 PM | #8 |
Junior Member
Join Date: Jan 2022
Posts: 29
|
1.9 did not improve ANYTHING with my setup. I know the setup works because it worked great with prior versions of Displaylink (once the programmers got their act together).
With Ventura 13.4 and newer on Apple Silicone laptops in clamshell mode, I'm back to displays not reliably waking from sleep with 1.8.1 and now with 1.9. I keep emailing support, and they responding helpfully within 24 hours, but it doesn't appear that they serve any function beyond basic troubleshooting and forwarding logs to technicians. |
|
|