Update to Venture 13.3 Disables DisplayLink

jgw · 03-28-2023, 02:58 PM

I updated to both Ventura 13.3 and DisplayLink 1.8.1 yesterday which results in any time I hook the unit up to my Macbook it instantly goes to lock screen. Upon entering passcode to open only 1 of the 2 connected monitors turns on and then all the apps appear to reboot and then the lock screen is activated again. I have unintstalled and reinstalled w/ no success. I have also tried going back to DisplayLink 1.8 w/ no success. Please help!

BruhWhyDidIUpgrade · 03-28-2023, 03:04 PM

I just posted a thread about this too ... let me know if you find a fix and I'll do the same? In the meantime I'm attempting to do a TimeCapsule backup and reload from internet recovery ...

https://displaylink.org/forum/showthread.php?t=68714

Jangveer · 03-28-2023, 03:35 PM

I updated to macos ventura 13.3 and it is not working for me either now. I have tried all the suggestions on other posts regarding this.

ahmedbasheer · 03-28-2023, 03:46 PM

Tried to update from 1.6 to 1.8.1, but no use. My entire mac freezes and nothing happens after I plug in the USB C cable. Once I remove it, everything goes back to normal. It is really frustrating since it was working smoothly for more than 6 months until yesterday.

pctech · 03-30-2023, 09:28 AM

This happens on the older versions of Ventura as well. In my case on a M1 Macbook Air / Ventura 13.2.1, Dell D6000 (firmware A04) / DL driver 1.8.0

When logging in again after sleep, and only after entering clamshell mode, the Mac always freezes with a static image on all external screens. Unplugging the dock fixes the issue immediately, and re-connecting triggers the issue within a few seconds.

If left frozen for about a minute, the login screen will eventually re-appear. Logging in again causes the screen to go black for 30 seconds before everything starts behaving normally again.

MrJB73 · 03-30-2023, 01:18 PM

YES! Same thing has happened..... Ventura 13.3 now causes this issue.

NOT a display 18.1 issue - But @displaylink when are you going to patch please...??

03-28-2023, 02:58 PM	#1
jgw Junior Member Join Date: Mar 2023 Posts: 1	Update to Venture 13.3 Disables DisplayLink I updated to both Ventura 13.3 and DisplayLink 1.8.1 yesterday which results in any time I hook the unit up to my Macbook it instantly goes to lock screen. Upon entering passcode to open only 1 of the 2 connected monitors turns on and then all the apps appear to reboot and then the lock screen is activated again. I have unintstalled and reinstalled w/ no success. I have also tried going back to DisplayLink 1.8 w/ no success. Please help!

03-28-2023, 03:35 PM	#3
Jangveer Junior Member Join Date: Mar 2023 Posts: 1	Not Working Since Last Evening I updated to macos ventura 13.3 and it is not working for me either now. I have tried all the suggestions on other posts regarding this.

03-28-2023, 03:46 PM	#4
ahmedbasheer Junior Member Join Date: Mar 2023 Posts: 1	Same problem from yesterday Tried to update from 1.6 to 1.8.1, but no use. My entire mac freezes and nothing happens after I plug in the USB C cable. Once I remove it, everything goes back to normal. It is really frustrating since it was working smoothly for more than 6 months until yesterday.

03-30-2023, 09:28 AM	#5
pctech Junior Member Join Date: Mar 2023 Posts: 2	Older versions of Ventura also affected This happens on the older versions of Ventura as well. In my case on a M1 Macbook Air / Ventura 13.2.1, Dell D6000 (firmware A04) / DL driver 1.8.0 When logging in again after sleep, and only after entering clamshell mode, the Mac always freezes with a static image on all external screens. Unplugging the dock fixes the issue immediately, and re-connecting triggers the issue within a few seconds. If left frozen for about a minute, the login screen will eventually re-appear. Logging in again causes the screen to go black for 30 seconds before everything starts behaving normally again. Last edited by pctech; 03-30-2023 at 09:31 AM.

03-28-2023, 03:04 PM	#2
BruhWhyDidIUpgrade Junior Member Join Date: Mar 2023 Posts: 7	I just posted a thread about this too ... let me know if you find a fix and I'll do the same? In the meantime I'm attempting to do a TimeCapsule backup and reload from internet recovery ... https://displaylink.org/forum/showthread.php?t=68714

03-30-2023, 01:18 PM	#6
MrJB73 Junior Member Join Date: Mar 2023 Posts: 9	YES! Same thing has happened..... Ventura 13.3 now causes this issue. NOT a display 18.1 issue - But @displaylink when are you going to patch please...??