Display does not light up on 10.6.4

luvcraft · 09-28-2010, 02:05 PM

Hello Carlo!

Yes, the other displays are correctly recognized by my primary graphics adapter. When I connect the HannsG HW191D directly I also get a correct setting. When I connect the other displays I have (Samsung SyncMaster 226bw) to the UGA it shows the same results as vice versa.

The suggested resultions from your drivers should be fine with the attached display - I have checked all possible settings, none seems to work.

Best regards,

Cris

09-28-2010, 02:05 PM	#3
luvcraft Junior Member Join Date: Sep 2010 Posts: 5	Reply Hello Carlo! Yes, the other displays are correctly recognized by my primary graphics adapter. When I connect the HannsG HW191D directly I also get a correct setting. When I connect the other displays I have (Samsung SyncMaster 226bw) to the UGA it shows the same results as vice versa. The suggested resultions from your drivers should be fine with the attached display - I have checked all possible settings, none seems to work. Best regards, Cris