|
|
|
09-28-2010, 02:05 PM
|
#1 |
|
Junior Member
Join Date: Sep 2010
Posts: 5
|
Reply
Hello Carlo!
Yes, the other displays are correctly recognized by my primary graphics adapter. When I connect the HannsG HW191D directly I also get a correct setting. When I connect the other displays I have (Samsung SyncMaster 226bw) to the UGA it shows the same results as vice versa. The suggested resultions from your drivers should be fine with the attached display - I have checked all possible settings, none seems to work. Best regards, Cris |
|
|
09-28-2010, 02:51 PM
|
#2 |
|
Mac Team
Join Date: Feb 2009
Posts: 606
|
Might be a problem with the adapter then, the best thing would be to check the adapter with the Windows drivers and if you have the same results ask for a replacement.
|
|
|
|
09-28-2010, 03:14 PM
|
#3 |
|
Junior Member
Join Date: Sep 2010
Posts: 5
|
Not working on OSx - workin on Win
Hi Carlo!
I just tried the adapter on Win XP - and it works like a charm :-/ Still no luck under OSX... Best regards, Cris. |
|
|
|
09-28-2010, 03:24 PM
|
#4 |
|
Junior Member
Join Date: Sep 2010
Posts: 5
|
Works now
Hello Carlo!
I have no idea why, but it does work now. After the check with the Win XP system, I stuck it back in the OSX machine and the display fired up. It looks a bit grainy and the mouse is kind of sluggish, but that is OK for my purposes. I assume this is a performance issue, right? Best regards, Cris |
|
|
|
09-28-2010, 03:31 PM
|
#5 |
|
Junior Member
Join Date: Sep 2010
Posts: 5
|
Thanks
BTW: Most of all: Thank you for your great support!
|
|
|
|
09-28-2010, 07:42 PM
|
#6 |
|
Mac Team
Join Date: Feb 2009
Posts: 606
|
You are most welcome. Even if I have no idea why it is now working I can't complain!
|
|
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Hybrid Mode
