Proximus touch 7" in XP 64 bit

Wim · 06-27-2011, 03:21 PM

I'm afraid that there is no XP 64bit driver and there are no plans to release one.

Wim

manuelgcl · 06-27-2011, 06:55 PM

Wim

This is a bad bad bad bad news, please, if you can talk with the driver´s develompment team , talk to them. Explain that there is a large community of Simers (flight simulator) that can be buyers of its touchscreen, but work on XP 64 bit, because we can use SAPM monitors and more than 4 Gb.

Other versions of windows like Windows 7 64-bit and Vista 64 bit, not allow SAPM monitors so it prefers to work in XP 64.

Then the drive to develop a 64-bit XP will allow simmer buy more of their products and build our cockpit flight simulators, at least I have 3 and I thinking buy another in case of finding a solution to my problem of the drive.

Thanks

piyokos · 06-28-2011, 03:55 AM

If DisplayLink does not support XP 64bit the product labeling MUST be changed to indicate that, as of now the product is advertised as "Windows XP, Windows Vista, Windows 7 32-/64-bit" which is INCORRECT.

The least you can do is acknowledge (in some official capacity) that the compatibility labels were screwed up, that would make it easier to claim to the retailer that all the units I purchased were defective so that I may obtain refunds.

Wim · 06-28-2011, 03:59 PM

Hi

We're not going to support XP 64 bit at any time. The market is small and getting smaller. We need to focus on current technology, eg Windows 7 and 8, Mac OS and USB 3 support.

Quote:

Originally Posted by piyokos

If DisplayLink does not support XP 64bit the product labeling MUST be changed to indicate that, as of now the product is advertised as "Windows XP, Windows Vista, Windows 7 32-/64-bit" which is INCORRECT.

The least you can do is acknowledge (in some official capacity) that the compatibility labels were screwed up, that would make it easier to claim to the retailer that all the units I purchased were defective so that I may obtain refunds.

The product packaging is outside our control. This is done by our customers. We try and influence this, but the final decision and wording is up to them.

We tell our customers that this is not supported and we have a manual on our website and an FAQ that both clearly state that XP 64bits is not supported.

Wim

06-27-2011, 06:55 PM	#2
manuelgcl Junior Member Join Date: Jun 2011 Posts: 2	Wim This is a bad bad bad bad news, please, if you can talk with the driver´s develompment team , talk to them. Explain that there is a large community of Simers (flight simulator) that can be buyers of its touchscreen, but work on XP 64 bit, because we can use SAPM monitors and more than 4 Gb. Other versions of windows like Windows 7 64-bit and Vista 64 bit, not allow SAPM monitors so it prefers to work in XP 64. Then the drive to develop a 64-bit XP will allow simmer buy more of their products and build our cockpit flight simulators, at least I have 3 and I thinking buy another in case of finding a solution to my problem of the drive. Thanks Last edited by manuelgcl; 06-28-2011 at 04:58 AM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

06-27-2011, 03:21 PM	#1
Wim Senior Member Join Date: Feb 2009 Posts: 1,561	I'm afraid that there is no XP 64bit driver and there are no plans to release one. Wim

06-28-2011, 03:55 AM	#3
piyokos Junior Member Join Date: Jun 2011 Posts: 2	If DisplayLink does not support XP 64bit the product labeling MUST be changed to indicate that, as of now the product is advertised as "Windows XP, Windows Vista, Windows 7 32-/64-bit" which is INCORRECT. The least you can do is acknowledge (in some official capacity) that the compatibility labels were screwed up, that would make it easier to claim to the retailer that all the units I purchased were defective so that I may obtain refunds.