monitor not being enabled. Win XP 32 bit

zpeterson-ATI · 12-27-2011, 08:43 PM

Support Tool Version: 1.0.0.10

--------- Computer Info ---------

Computer Name: ADVBROK-2353
Logged on as: ADVANCE-TRADING\mreginelli
Computer: Hewlett-Packard - HP Compaq 6730b (FN020UT#ABA) CNU9470KSL
OS: Microsoft Windows XP Professional (X86-based PC), Service Pack 3, English
OS Build: 2600 (Debug = False)
System Bios: Version 68PDD Ver. F.11 built 2009-09-14
CPU: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz
Memory: 2972 MB
Free Space: 31355 MB
Primary Resolution: 1280x800x32
Graphics: Mobile Intel(R) 4 Series Express Chipset Family (Intel Corporation)
Graphics Driver: 6.14.10.4953 Dated 2008-05-21
Graphics: Mobile Intel(R) 4 Series Express Chipset Family (Intel Corporation)
Graphics Driver: 6.14.10.4953 Dated 2008-05-21
Installed Package: DisplayLink Core Software (6.1.35667.0) on 2011-12-22 Status is Installed
Installed Package: DisplayLink Graphics (6.1.35667.0) on 2011-12-22 Status is Installed
USB3.0 Host Controller Drivers Installed:
Installed Codec: Indeo® video 5.10 Intel Corporation R.5.10.15.2.55

DisplayLink Version: 6.1.35667.0

Optimize for Video: None (Uses default if DL is installed)

--------- Nivo Info ---------

Nivo's currently attached: PID_0102\\0102-HVKS63012200000
Nivo's currently attached: PID_037B\\006762

Hardware IDs:

Samsung UbiSync Monitor

Wim · 12-28-2011, 12:17 PM

Do you have the zip file of logs as we need this to see if the HP monitor is being detected.

Thanks

Wim

zpeterson-ATI · 12-28-2011, 01:05 PM

i can tell you the HP monitor is not being detected off the bat. In display properties, it shows the plugable adaptor, but says that there is nothing plugged into it.

What i linked above (system_details.txt) is all that the debugger put out. Should there have been more?

Wim · 12-28-2011, 03:21 PM

Quote:

Originally Posted by zpeterson-ATI

i can tell you the HP monitor is not being detected off the bat. In display properties, it shows the plugable adaptor, but says that there is nothing plugged into it.

What i linked above (system_details.txt) is all that the debugger put out. Should there have been more?

Yes, it should have created a zip file with the contents from c:\program files\DisplayLink Core Software\debug. Was there an error message from the debug tool?

Could you zip up this directory and post it?

Thanks

Wim

zpeterson-ATI · 12-28-2011, 04:41 PM

where would you like me to host this zip?

zpeterson-ATI · 01-03-2012, 01:51 PM

should be attached.

zpeterson-ATI · 01-04-2012, 08:20 PM

I have two desktops that are also having this EXACT same issue. Im guessing it is a problem with the USB controller and the driver conflicting.

If there is a second USB controller or bus on the motherboard, then there will not be any issues running multiple plugable adapters. By adding a virtual bus (aka, a external USB hub), the display will be detected just fine, as we have determined on one of our test machines.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

12-27-2011, 08:43 PM	#1
zpeterson-ATI Junior Member Join Date: Dec 2011 Location: Bloomington, IL Posts: 16	Support Tool Version: 1.0.0.10 --------- Computer Info --------- Computer Name: ADVBROK-2353 Logged on as: ADVANCE-TRADING\mreginelli Computer: Hewlett-Packard - HP Compaq 6730b (FN020UT#ABA) CNU9470KSL OS: Microsoft Windows XP Professional (X86-based PC), Service Pack 3, English OS Build: 2600 (Debug = False) System Bios: Version 68PDD Ver. F.11 built 2009-09-14 CPU: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz Memory: 2972 MB Free Space: 31355 MB Primary Resolution: 1280x800x32 Graphics: Mobile Intel(R) 4 Series Express Chipset Family (Intel Corporation) Graphics Driver: 6.14.10.4953 Dated 2008-05-21 Graphics: Mobile Intel(R) 4 Series Express Chipset Family (Intel Corporation) Graphics Driver: 6.14.10.4953 Dated 2008-05-21 Installed Package: DisplayLink Core Software (6.1.35667.0) on 2011-12-22 Status is Installed Installed Package: DisplayLink Graphics (6.1.35667.0) on 2011-12-22 Status is Installed USB3.0 Host Controller Drivers Installed: Installed Codec: Indeo® video 5.10 Intel Corporation R.5.10.15.2.55 DisplayLink Version: 6.1.35667.0 Optimize for Video: None (Uses default if DL is installed) --------- Nivo Info --------- Nivo's currently attached: PID_0102\\0102-HVKS63012200000 Nivo's currently attached: PID_037B\\006762 Hardware IDs: Samsung UbiSync Monitor

12-28-2011, 12:17 PM	#2
Wim Senior Member Join Date: Feb 2009 Posts: 1,561	Do you have the zip file of logs as we need this to see if the HP monitor is being detected. Thanks Wim

12-28-2011, 01:05 PM	#3
zpeterson-ATI Junior Member Join Date: Dec 2011 Location: Bloomington, IL Posts: 16	i can tell you the HP monitor is not being detected off the bat. In display properties, it shows the plugable adaptor, but says that there is nothing plugged into it. What i linked above (system_details.txt) is all that the debugger put out. Should there have been more?

12-28-2011, 04:41 PM	#5
zpeterson-ATI Junior Member Join Date: Dec 2011 Location: Bloomington, IL Posts: 16	where would you like me to host this zip?

01-04-2012, 08:20 PM	#7
zpeterson-ATI Junior Member Join Date: Dec 2011 Location: Bloomington, IL Posts: 16	I have two desktops that are also having this EXACT same issue. Im guessing it is a problem with the USB controller and the driver conflicting. If there is a second USB controller or bus on the motherboard, then there will not be any issues running multiple plugable adapters. By adding a virtual bus (aka, a external USB hub), the display will be detected just fine, as we have determined on one of our test machines.