|
|
|||||||
 |
|
|
Thread Tools | Search this Thread | Display Modes |
|
|
01-28-2012, 03:35 PM
|
#1 |
|
Junior Member
Join Date: May 2011
Posts: 4
|
cannot discover the Display link hub - Power light goes out on connection
I have a Kensignton dock and have problems whenever I change the configuration of my system. Have raised this previously but cannot get a stable solution to the problem.
The unit worked perfectly up to last week, so I don't think there is an issue with cables or the unit itself. Problem: Unconnected - the power light on the dock blinks. Having installed the Kensington files, then the display link update - reboot the pc and plug in the USB cable, nothng happens and the power light on the dock goes out. Support files attached Last edited by Brendan; 01-28-2012 at 04:10 PM. |
|
|
03-21-2012, 09:51 AM
|
#2 |
|
Junior Member
Join Date: May 2011
Posts: 4
|
As it turns out this is a hardware fault, possibly with the DVI dongle. Have been on to Kensington who are replacing the unit... At least that's what they have told me .. have been waiting weeks for the replacement and still no sign.
Kind regards |
|
|
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Hybrid Mode
