Problem with USB 3.0 ASMedia Host controller and DisplayLink

guvies · 03-08-2012, 06:50 AM

I have the same problem, My laptop Asus N55SF have USB 3.0 (2 ports) and USB 2.0 (2 ports also). My Targus are ACP70USZ and supports USB 3.0 but only works in USB 2.0 the driver of DisplayLink Graphics (6.1.36490.0), DisplayLink Core Software (6.1.36484.0) and the driver of USB is Asmedia ASM104x USB 3.0 Host Controller Driver (1.14.4.0) installed on 2012-03-07 Status is Installed.

Wim · 03-09-2012, 01:16 PM

I'm afraid that this will need an update from AS Media. We don't know when this will be, but are trying to find out. It looks like it is possible to contact AS Media directly to try and get an update:

http://www.asmedia.com.tw/eng/e_contact.php

Wim

rlane00 · 03-09-2012, 10:37 PM

I just sent them an email, with a link back to this thread, and asked them to provide with some feedback on the situation. Thanks.

ultrah · 03-19-2012, 03:04 PM

I can confirm this issue.

I also own a Samsung Series 7 700Z3A and a Toshiba Dynadock U3.

The dock works fine on the USB 2.0 port, albeit with lower display performance.

On USB 3.0 it is only recognized as two generic usb hubs. I can use mouse and keyboard, but nothing else.

On another Machine with an ASMedia 106x Controller it works fine on USB 3.0

Host Controller Driver Version is Version 1.14.8.0, OS is Win 7 x64

by the way, I only got useless respones from samsung along the lines of "the notebook is fine, the device you are trying to attach is broken"

Randog77 · 04-02-2012, 05:26 PM

Version ASMedia 1.14.8.0 works properly with the Displaylink now!

ultrah · 04-03-2012, 08:23 AM

Quote:

Originally Posted by Randog77

Version ASMedia 1.14.8.0 works properly with the Displaylink now!

I can't verify this because I am on vacation right now but I doubt that. If you look one post up you can see that I already tried this driver version.

rlane00 · 04-04-2012, 04:01 PM

I just updated to this latest driver version and the USB3.0 is now working for me just as promised. I hadn't tried to update previously based on the feedback that it hadn't worked for ultrah, but it's working for me.

ultrah · 04-11-2012, 09:55 AM

Still not working for me :/

Wim · 04-12-2012, 07:55 AM

Its possible that you have different chip versions of the AS Media Host controller and different firmware programmed into the host controller. This is why the new HC driver may work for some and not for others.

ultrah, it might be worth asking AS Media if they have a way of making sure you have the latest firmware in your host controller, as this might help.

Wim

Randog77 · 04-27-2012, 06:42 PM

I am using the firmware from this site:
http://www.station-drivers.com/page/asmedia.htm

version 110914

The only problem I have found is that I cant use my USB 2 Serial port adaptor (with an FTDI chip inside) and my Terasic blaster (with an FTDI chip insdie) at the same time. It seems to crash something. Its unfortinate, because otherwise everthing works perfect (as far as I can tell). I run on USB 2.0 for now since I cant debug without both running.

03-19-2012, 03:04 PM	#4
ultrah Junior Member Join Date: Mar 2012 Posts: 4	I can confirm this issue. I also own a Samsung Series 7 700Z3A and a Toshiba Dynadock U3. The dock works fine on the USB 2.0 port, albeit with lower display performance. On USB 3.0 it is only recognized as two generic usb hubs. I can use mouse and keyboard, but nothing else. On another Machine with an ASMedia 106x Controller it works fine on USB 3.0 Host Controller Driver Version is Version 1.14.8.0, OS is Win 7 x64 by the way, I only got useless respones from samsung along the lines of "the notebook is fine, the device you are trying to attach is broken" Last edited by ultrah; 03-19-2012 at 03:41 PM.

04-02-2012, 05:26 PM	#5
Randog77 Junior Member Join Date: Apr 2012 Posts: 2	USB 3.0 works now... Version ASMedia 1.14.8.0 works properly with the Displaylink now!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

03-08-2012, 06:50 AM	#1
guvies Junior Member Join Date: Mar 2012 Posts: 1	I have the same problem, My laptop Asus N55SF have USB 3.0 (2 ports) and USB 2.0 (2 ports also). My Targus are ACP70USZ and supports USB 3.0 but only works in USB 2.0 the driver of DisplayLink Graphics (6.1.36490.0), DisplayLink Core Software (6.1.36484.0) and the driver of USB is Asmedia ASM104x USB 3.0 Host Controller Driver (1.14.4.0) installed on 2012-03-07 Status is Installed.

03-09-2012, 01:16 PM	#2
Wim Senior Member Join Date: Feb 2009 Posts: 1,561	I'm afraid that this will need an update from AS Media. We don't know when this will be, but are trying to find out. It looks like it is possible to contact AS Media directly to try and get an update: http://www.asmedia.com.tw/eng/e_contact.php Wim

03-09-2012, 10:37 PM	#3
rlane00 Junior Member Join Date: Feb 2012 Posts: 9	I just sent them an email, with a link back to this thread, and asked them to provide with some feedback on the situation. Thanks.

04-04-2012, 04:01 PM	#7
rlane00 Junior Member Join Date: Feb 2012 Posts: 9	I just updated to this latest driver version and the USB3.0 is now working for me just as promised. I hadn't tried to update previously based on the feedback that it hadn't worked for ultrah, but it's working for me.

04-12-2012, 07:55 AM	#9
Wim Senior Member Join Date: Feb 2009 Posts: 1,561	Its possible that you have different chip versions of the AS Media Host controller and different firmware programmed into the host controller. This is why the new HC driver may work for some and not for others. ultrah, it might be worth asking AS Media if they have a way of making sure you have the latest firmware in your host controller, as this might help. Wim

04-27-2012, 06:42 PM	#10
Randog77 Junior Member Join Date: Apr 2012 Posts: 2	I am using the firmware from this site: http://www.station-drivers.com/page/asmedia.htm version 110914 The only problem I have found is that I cant use my USB 2 Serial port adaptor (with an FTDI chip inside) and my Terasic blaster (with an FTDI chip insdie) at the same time. It seems to crash something. Its unfortinate, because otherwise everthing works perfect (as far as I can tell). I run on USB 2.0 for now since I cant debug without both running.