Black/blank screen (was green) with Sony Bravia

forzamilan14 · 02-21-2013, 08:59 PM

Bump. No reply yet and really would like to get this solved. It's really a mystery to me. I have tried everything! Or at least it seems like it! Thanks!

Wim · 02-22-2013, 02:27 PM

Looks like the software is running correctly and has set the display to the preferred resolution, but the TV doesn't like the signal for some reason.

Have you tried changing the display properties in Windows to see if it works in lower resolutions?

Wim

forzamilan14 · 02-22-2013, 11:22 PM

Hi Wim,

Yes, I have tried the display properties in every resolution. Now, every setting from 1366x768 to 800x600 is flashing green. It's not black anymore, but every setting flashes green in a different size.

Also, the TV works with my dish network receiver in 1 HDMI input and my PS3 in another HDMI input. I can also use a different computer that has an HDMI output in the same HDMI input I use for the DisplayLink Adapter and it has no problems.

forzamilan14 · 03-01-2013, 07:03 AM

Hi there,

I still can't figure out what is wrong with my displaylink adapter. It is still giving me the green screen. Thanks.

forzamilan14 · 03-02-2013, 03:54 AM

Hi,

Checking in again. It's still not working. I tried everything I described in my first post and my other post. I am still only getting a green flashing screen on every resolution with my TV (Sony Bravia)

Thanks.

forzamilan14 · 03-05-2013, 11:30 PM

Hi there,

I still have not received a response to this issue and nothing seems to work. What is the next step I can take?

Wim · 03-06-2013, 12:49 PM

I can't diagnose this further, as it looks like the software is working but for some reason the TV is not syncing to the video output.

Our adapters pass HDMI compliance so the video signal should be outputted correctly. Have you tried with a shorter or different HDMI cable?

Wim

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

02-21-2013, 08:59 PM	#1
forzamilan14 Junior Member Join Date: Feb 2013 Posts: 6	Bump. No reply yet and really would like to get this solved. It's really a mystery to me. I have tried everything! Or at least it seems like it! Thanks!

02-22-2013, 02:27 PM	#2
Wim Senior Member Join Date: Feb 2009 Posts: 1,561	Looks like the software is running correctly and has set the display to the preferred resolution, but the TV doesn't like the signal for some reason. Have you tried changing the display properties in Windows to see if it works in lower resolutions? Wim

02-22-2013, 11:22 PM	#3
forzamilan14 Junior Member Join Date: Feb 2013 Posts: 6	Hi Wim, Yes, I have tried the display properties in every resolution. Now, every setting from 1366x768 to 800x600 is flashing green. It's not black anymore, but every setting flashes green in a different size. Also, the TV works with my dish network receiver in 1 HDMI input and my PS3 in another HDMI input. I can also use a different computer that has an HDMI output in the same HDMI input I use for the DisplayLink Adapter and it has no problems.

03-01-2013, 07:03 AM	#4
forzamilan14 Junior Member Join Date: Feb 2013 Posts: 6	Hi there, I still can't figure out what is wrong with my displaylink adapter. It is still giving me the green screen. Thanks.

03-02-2013, 03:54 AM	#5
forzamilan14 Junior Member Join Date: Feb 2013 Posts: 6	Hi, Checking in again. It's still not working. I tried everything I described in my first post and my other post. I am still only getting a green flashing screen on every resolution with my TV (Sony Bravia) Thanks.

03-05-2013, 11:30 PM	#6
forzamilan14 Junior Member Join Date: Feb 2013 Posts: 6	Hi there, I still have not received a response to this issue and nothing seems to work. What is the next step I can take?

03-06-2013, 12:49 PM	#7
Wim Senior Member Join Date: Feb 2009 Posts: 1,561	I can't diagnose this further, as it looks like the software is working but for some reason the TV is not syncing to the video output. Our adapters pass HDMI compliance so the video signal should be outputted correctly. Have you tried with a shorter or different HDMI cable? Wim