Problem with USB 3.0 ASMedia Host controller and DisplayLink

matthewt · 06-20-2012, 02:40 PM

I updated my drivers from the same place as Randog77 and now it's working over USB3.

I also updated the firmware to 1222oE (minor hassle you need to boot into DOS).

This is on a Samsung 700z5a i7 quadcore. Previously only the usb hub worked on USB3 (USB2 everything worked). Now after installing the new USB3 drivers and a few reboots everything is working fine over USB3.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

06-20-2012, 02:40 PM	#19
matthewt Junior Member Join Date: Jun 2012 Posts: 1	I updated my drivers from the same place as Randog77 and now it's working over USB3. I also updated the firmware to 1222oE (minor hassle you need to boot into DOS). This is on a Samsung 700z5a i7 quadcore. Previously only the usb hub worked on USB3 (USB2 everything worked). Now after installing the new USB3 drivers and a few reboots everything is working fine over USB3.