Bad Pool Header

Wim · 06-21-2012, 08:10 AM

I see you are using a basic graphics theme in Vista. Could you try switching to an Aero graphics theme and see if this fixes the issue?

Wim

Cylence · 06-22-2012, 06:04 AM

Hi,

when using HardwareOverlay Renderer Windows automatically deactivates Aero.
But Overlay Renderer is the best Renderer for Video. Aero is also using this Renderer, because of this Aeor is deactivated when a different program uses it. The 5.6 Version does not have any problems with this.
I try this weekend if the same problems occur when i have Aero activated, i dont had time yesterday.

best regards,

tom

Cylence · 06-26-2012, 07:37 AM

It happens also when Aero is activated. Only 5.6 Driver Version is running without bluescreens and without video problems on other screens.

Cylence · 06-26-2012, 11:50 AM

When using a newer driver than 5.6 i always get bluescreens, also when the usb monitor is not connected, only driver is installed. very strange. Bluescreen appears not directly after installing or activating the device, but sometimes after some minutes, sometimes after some hours.

Wim · 06-30-2012, 11:14 AM

Can you talk me through exactly how you enable the HardwareOverlay Renderer so I can try and reproduce this and see what changed in v6.0 software?

Thanks

Wim

Cylence · 07-16-2012, 07:59 AM

only start a videoplayer like VLC set there the videorenderer to hardware overlay and play thats it.

Wim · 07-16-2012, 01:36 PM

I use VLC all the time (latest v2.0.2) with the hardware overlay and have no issues. I think there were bugs in earlier versions of VLC that caused issues. Are you using the latest version of VLC?

My video setup is

Wim

06-22-2012, 06:04 AM	#2
Cylence Junior Member Join Date: Jan 2011 Posts: 11	Hi Hi, when using HardwareOverlay Renderer Windows automatically deactivates Aero. But Overlay Renderer is the best Renderer for Video. Aero is also using this Renderer, because of this Aeor is deactivated when a different program uses it. The 5.6 Version does not have any problems with this. I try this weekend if the same problems occur when i have Aero activated, i dont had time yesterday. best regards, tom

06-26-2012, 07:37 AM	#3
Cylence Junior Member Join Date: Jan 2011 Posts: 11	Hi It happens also when Aero is activated. Only 5.6 Driver Version is running without bluescreens and without video problems on other screens.

06-26-2012, 11:50 AM	#4
Cylence Junior Member Join Date: Jan 2011 Posts: 11	one more When using a newer driver than 5.6 i always get bluescreens, also when the usb monitor is not connected, only driver is installed. very strange. Bluescreen appears not directly after installing or activating the device, but sometimes after some minutes, sometimes after some hours. Last edited by Cylence; 06-26-2012 at 12:12 PM.

07-16-2012, 07:59 AM	#6
Cylence Junior Member Join Date: Jan 2011 Posts: 11	Hi only start a videoplayer like VLC set there the videorenderer to hardware overlay and play thats it.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

06-21-2012, 08:10 AM	#1
Wim Senior Member Join Date: Feb 2009 Posts: 1,561	I see you are using a basic graphics theme in Vista. Could you try switching to an Aero graphics theme and see if this fixes the issue? Wim

06-30-2012, 11:14 AM	#5
Wim Senior Member Join Date: Feb 2009 Posts: 1,561	Can you talk me through exactly how you enable the HardwareOverlay Renderer so I can try and reproduce this and see what changed in v6.0 software? Thanks Wim

07-16-2012, 01:36 PM	#7
Wim Senior Member Join Date: Feb 2009 Posts: 1,561	I use VLC all the time (latest v2.0.2) with the hardware overlay and have no issues. I think there were bugs in earlier versions of VLC that caused issues. Are you using the latest version of VLC? My video setup is Wim