Icon does not show on tray, display does not work

MarkM · 06-25-2012, 05:48 PM

Hi Wim,

I just re-imaged the machine again and performed the exact same steps. This time only the USB hub was detected. This is sooo weird.

Wim · 06-26-2012, 10:41 AM

Hi MarkM

It looks like the DisplayLink chip is not being detected on the USB bus. I suspect this is a hardware fault with the dock.

Could you contact your Targus rep and see if they have a replacement unit for evaluation? Hopefully this should solve the issue and you can do a proper evaluation.

Wim

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

06-25-2012, 05:48 PM	#1
MarkM Junior Member Join Date: Jun 2012 Posts: 9	Hi Wim, I just re-imaged the machine again and performed the exact same steps. This time only the USB hub was detected. This is sooo weird.

06-26-2012, 10:41 AM	#2
Wim Senior Member Join Date: Feb 2009 Posts: 1,561	Hi MarkM It looks like the DisplayLink chip is not being detected on the USB bus. I suspect this is a hardware fault with the dock. Could you contact your Targus rep and see if they have a replacement unit for evaluation? Hopefully this should solve the issue and you can do a proper evaluation. Wim