Windows 8 Display goes often black for a second or two then comes back

Wim · 07-29-2013, 01:40 PM

This sounds like the device is dropping off the USB bus, which could be due to a known problem with the VIA USB 3.0 hub in the dock. There is a firmware update from VIA to fix this, and is available from the Toshiba support website here:

http://support.toshiba.com/support/m...eeText=3286829

Could you download and try this to see if it works?

Thanks

Wim

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

07-29-2013, 01:40 PM	#2
Wim Senior Member Join Date: Feb 2009 Posts: 1,561	This sounds like the device is dropping off the USB bus, which could be due to a known problem with the VIA USB 3.0 hub in the dock. There is a firmware update from VIA to fix this, and is available from the Toshiba support website here: http://support.toshiba.com/support/m...eeText=3286829 Could you download and try this to see if it works? Thanks Wim