Toshiba DynaDock vs Toshiba P875 (Intel USB)

FloridaMatt · 09-27-2013, 03:20 PM

Although I have only the one dynadock, device manager shows two generic superspeed hubs, both with revision 2397.

Both of them, and 2 of the 4 "generic USB hub" entries go away if I unplug the dynadock.

JamesH · 09-27-2013, 03:34 PM

Hi,

I'd recommend upgrading to the latest hub firmware version for your dock which is v9.82 from here: http://support.toshiba.com/support/m...eeText=3286829

Thanks,
James

FloridaMatt · 09-27-2013, 04:07 PM

I'd seen that in the list of files but wasn't persistent enough to get it to work (after the unzip, it tries to run c:\program ) But this time I went ahead and unzipped the zip file that was inside the .exe, ran the installer it contained, and got the update done.

Didn't make any difference. items 2 and 3 from the original post are still there. item 1 is gone, but that's because I discovered the lan adapter was set to wake the computer without requiring a magic packet.

Curiously, having done all this the revision number has gone down to 2198...

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

09-27-2013, 03:20 PM	#1
FloridaMatt Junior Member Join Date: Sep 2013 Posts: 7	Although I have only the one dynadock, device manager shows two generic superspeed hubs, both with revision 2397. Both of them, and 2 of the 4 "generic USB hub" entries go away if I unplug the dynadock.

09-27-2013, 03:34 PM	#2
JamesH Senior Member Join Date: Jan 2012 Posts: 1,523	Hi, I'd recommend upgrading to the latest hub firmware version for your dock which is v9.82 from here: http://support.toshiba.com/support/m...eeText=3286829 Thanks, James

09-27-2013, 04:07 PM	#3
FloridaMatt Junior Member Join Date: Sep 2013 Posts: 7	I'd seen that in the list of files but wasn't persistent enough to get it to work (after the unzip, it tries to run c:\program ) But this time I went ahead and unzipped the zip file that was inside the .exe, ran the installer it contained, and got the update done. Didn't make any difference. items 2 and 3 from the original post are still there. item 1 is gone, but that's because I discovered the lan adapter was set to wake the computer without requiring a magic packet. Curiously, having done all this the revision number has gone down to 2198...